What Have You Done To Your 3rd Gen Today?

added 2,500 miles last week

 

Installed a fixed mount INNO roof rack system on my 2016 Tacoma Double Cab. Back bar is mounted using one of the factory inserts front drilled new location. Punched a set of carbon covers in the process. With basket I had stored.

Allowed for height restricted parking at Universal Studios!

 

Sorry, playing catch-up on the thread... I assume you have the SPC UCAs? There's a forum on here going back years that references alignments specs for the SPC UCA. FYI, 0 camber/ 0 toe/ 3 degrees of caster(slight difference side to side to account for crown of the road. The trick is to move the LCA adjustments all the way forward for max caster and adjust camber and Caster in the UCA.

I had a hellofa time with alignments, even with a so called lift specialist that sold the SPC product. I found a shop that would listen to the instructions I was giving them and now I'm set.

Hope you have it all squared away, but feel free to lob any questions my way. BTW, I'm running 275 70 17 BFG KO2, -12mm offset/ 9" wide wheel, and no rub with the factory mudguards.

 

well CBI officially screwed me i doubt i will ever order from this "premier off road company" pshhh. First and foremost rencelty ordered rock sliders by CBI OFFROAD, Idaho sent out to the east coast NC. When i first received them they were literally padded with a minimal amount of foam sitting on a pallet. #1 Terrible packaging #2 terrible powder coating super thin and had multiple spots already rubbed down the metal. #3 one area was actually bent. #5 no directions what so ever so i had so contact them and wait two days for them to get back to me. #6 and the ultimately the worst they gave me to driver side sliders how does that even happen. As for the powder coating they told me to paint it with satin paint and reimbursed me $25.00 big freaking whoop !!!. For the bent piece they told me to hammer it back. I told myself ok my truck isn't a mall crawler so thats all fine and dandy but then i got to mount them on my one day off this week and BOOM sent me to driver side sliders. its been 1 day and they still haven't returned two emails and one phone call. CBI where you at and why do you suck so bad.

 

Same here! I'm not far from you in mount holly!

 

Is the back of your truck dragging ass a little?

 

3" pro comp with 285s BFG A/T KO2s

 

Where'd you get them? Matte or gloss finish? Wheel width and offset? I think I need these to pair with the SSM.

 

well, I get to wax her today

 

If you ordered using paypal....make a claim....if you did it with your credit card, call and tell them the problem as well, that the manufacturer sent out faulty stuff. Paypal works with you a lot more. I hope you get it resolved....nothing like opening an xmas present and finding out it's fruit cake.

 

Installed the Pop and Lock kit today. I didn't like having to use a key each time to unlock the tailgate. It now works with my remote to unlock the passenger doors.

 

Did it myself too after having the truck for 150 miles. Damn key was annoying! Just like having to pull out the keyless fob to unlock the darn passenger side door. Toyota really cut back on cost but charged like it was premiun. I swear, watch in 2018...they are gonna correct that problem and piss us all off!

 

After many months, I finally got my wheels and tires mounted up. SR definitely isn't a bad deal! Bilstein 5100 @ 1.75 in front, stock rear, tires are 265/70R17

 

Stock suspension

 

How many trucks actually have a power tailgate lock from the factory?

 

They really screwed the pooch. I would demand my money back.

Thanks for sharing, they are off of my preferred vendor list.

I have mobtown sliders and love them. They are tough to install but worth it.

Good luck.

 

Ford and Chevy's do

 

Anyone in La Habra, Rowland Heights, Hacienda Heights, SGV or other close areas up to meet today? I'm thinking of taking a drive up to Azusa Canyon....any takers?

 

They have to because they are american products....my taco was built in Mexico sadly nut at least it came with a bottle of Tapatio in the glove box!

 

I have to add something to this....my girlfriend who speaks english perfectly and was born here in California read door ajar as....door ahar! I almost crapped myself....