What Have You Done To Your 2nd Gen Tacoma Today?

thanks!

 

Order my Whiteline bushings from the link you provided. They will be here next Monday (too cheap to pay for prime). Then my LCA rehab will start so I can get my alignment fixed. You can see how bad it is by the wear on. My drivers side tire.

 

check the lugs and weights. if you had one on the rear that lost a weight, you might not have felt it until you put it up front

 

Ay. I have a question but dont want to start a new thread. My headliner over passenger side rear seat sags, i pop it back up and then look back a few minutes later and she is sagging. I have 150 miles left of my 36k mile warranty. I also have a sub in the back. Will they try and say the sub caused it? Should i remove all audio stuff before having them fix that shit.?

 

Just did this last week. AP standard leafs with fox 2.0 and timbren bumps..

 

It probably wouldn't hurt to remove the sub since it's easy enough. Not sure on your exact set up.

 

1 comp level sundown 8 cone up

 

Aha, no I mean how it's laid out. I have my amp under my seat and my sub behind the rear seat, so it would be very easy for me to take out the sub and keep the amp hidden by my weathertechs.

 

amp rack on back wall

 

A little nonchalant about "wrapping the headers on the lsx" weren't we? Come on, I want details...what is it? What's it used for? And some additional photos if you don't mind.

 

Jhst need to pull the sub really. And maybe the radio

 

Swapped headlights yesterday

 

Do you think they will try and gove me a hard time or fix it

 

And if they do fix it an approx time

 

Tech is going to try and fix the headliner droops, and if that doesnt work they will order a new 1 he said. He seemed competent.

 

They will probably just use some kind of spay adhesive on they part that droops.

 

As long as it stops drooping and regains its firmness

 

Problem with that is that the headliner material is backed with a thin foam padding. For various reasons the foam begins to separate from the fabric resulting in the dreaded "droop." You can try a spray adhesive, but because of the deteriorating foam on both the headliner shell and the fabric, it doesn't always work. Ask me how I know, lol.

 

Its not the fabric. Its the whole structure.

 

Installed a tranny cooler. Welded up my own bracket that mounts to the two unused holes in front of the condenser because I don't trust the little plastic pins through the radiator that it comes with.