What Have You Done To Your 3rd Gen Today?

Go on their website and look for 2016 fog lights

 

I wish I had a partial load.

 

Can you tell me what came in the box with your skid plate? Mine came opened, mounted with 4 17mm bolts and spacers, and 1 loose 12mm bolt/washer. There were no installation instructions, or any other hardware. What am I missing?tia

 

Mine came in an intact Toyota TRD cardboard box, with all (6) pre-mounted bolts and spacers, and a single sheet of installation instructions.

Frank

 

The 6 bolts were premounted on the skid upon delivery (4) 17mm & (2) 12mm with spacers/retainers. I downloaded the install instructions in advance - attached. I also added a picture of the flyer that was in the box. Hope this helps.

 

I can 2nd that

 

Thanks, Frank. Do you still have the instructions?

Thank you very much! This is extremely helpful. Seems I only need 1 M8x1.25x 35mm bolt and 2 M8 bolt retainers to install the plate. My only other question: do the 12mm bolts at the rear flush-up to the frame (no spacers)? tia

 

No spacers for 12mm

 

What have I done to my 3rd gen?
Added some stickers....
Drove it down to San Luis Pass to do some 4 wheelin in the deeper sand....
Took the wife, to watch the sunset.
She's Russian.....loves the warmth of Tejas!
I use to live in Moscow, for work, froze my ass off!

 

nice pics. are those FNs? if so which color? High dark gloss or matte gunmetal?

 

So I finally got around to installing my Squadron Pro ditch lights, Squadron Pro Fog lights, Onx6 Race series 20" light bar, and Smittybilt 12K lb winch

 

Thanks!
Yep, from Dustin at FN, Dark gloss gray.

 

Sweet! And I found these looks like they will work so no cutting

$35 Starkey Products Fog Light Wiring Adapters H11 to Deutsch Set

https://www.amazon.com/gp/product/B01EXWDNTK/ref=od_aui_detailpages00?ie=UTF8&psc=1

 

Half the price

http://www.ebay.com/itm/Heavy-Duty-...ash=item58dde59378:g:7pUAAOSwOVpXaxrX&vxp=mtr

 

Finally got all my Rigid Lights in and wired up. It's like putting high heels on a smoking hot chick! MEOW...

 

Thanks!

 

That's a beautiful view........ the sunset of course.....

 

Ordered last night, delivered today. Gotta love Amazon prime. Quality looks good, they feel solid and have a good weight to them. I'll post pictures once installed.

 

Hey all, I have seen a lot of good information but I do have a question (need opinions/past experience):
I would like to upgrade wheels/tires and suspension; however, my plan is to do wheels/tires and some other things now and then add the suspension last (once I get some weight on the truck - bed bars, RTT, sliders, etc).
My question is, if I put on 265/75/16 now and then later get a 2" lift (in 6 months), will the truck look bad? Has anyone done this? Im worried the lift will create dead space that I could fill with a larger tire, like 285/75/16.
Thoughts? Opinions?

Much appreciated!

 

I'd wait on tires until you're lifted. 265 fits stock so with a lift you'll have a lot of exposed wheel well area.