What Have You Done To Your 3rd Gen Today?

Flicker could be caused due to the amperage being too low. Both your OEM foglights and Rigid fog lights use 12v DC. The question is how many watts do the new fog lights use? Plug that information into Ohms law (Watts / Volts = Amps). If the fuse is not replaced to the correct amperage for power consumption, it's possible that if the new fog lights draw more power than the OEM you could choke the new fog lights of power or trip a fuse if not calculated properly. Generally LED use less power than incandescent but you should check with the manufacturer to be sure. I would also check the plug with a volt-meter to ensure the plug is getting the proper amount of voltage required for the new Rigid lights

 

Right here man, its also in my signature!

https://www.tacomaworld.com/threads...x4-5-speed-access-cab-build-bs-thread.427983/

 

I really like the bracket. The compressor is on my wish list, but the bracket sold by Slee is over $100! That's pretty steep for a bent piece of metal.

 

Mind posting up a sound clip? My wallet wants to know if its worth starving a little this week.

 

Color matched magnetic gray emblem. Officially no chrome on the outside of my taco now

 

Thanks man, Its just a simple piece of angle for shelving that I cut and sandblasted and painted!

 

Looks great! Thanks for posting.

 

Thanks Mark!

 

Looks good, but you still have chrome till you BHLM.

 

How much lift did you get with the 887 set at zero?

 

I don't have a clip but it is really loud. It is fine in normal driving. No matter what speed when you punch it you can barely hear the radio. I just learned real quick to keep my foot out of it most of the time. When I go to pass someone it sounds like it will suck the hood into the intake. Older people like me will swear you have a big azz Holley 850 double pumper with no breather. There is a video on this thread but you gotta look for it. Trust me the video and sound are not even close to the decibels in the truck. The performance is worth the money. My mpg's went up. Installed a week or 2 after had the TSB on the transmission.

 

What is that?

 

Black Head Light Mod

 

Nice job with the bracket. I'm not that crafty I ended up paying $110 for one. Can you show or tell me what wires you hooked up to under the dash? I think I remember the instructions saying to use a switched power wire and an illumination wire?

 

Cory, you must be ready to swap as your running out of projects aren't you

Looks good

 

16x8 SCS Ray 10's on Falken wildpeak AT3W 265/75/16 and installed my BAMF grill (which surprisingly doesn't fit all that well, but i got it to look decent). Sorry for the crappy pics

 

I just hooked the red yellow wire (ignition wire) up out under the hood and just taped off the blue white wire (illumination wire) and it still lights up when the switch is on. Works perfectly fine for me sice you got to open the hood to hook up the air line anyways!

Thanks man, and it's getting scary cause I am running out of projects lol, done just about everything imaginable to this base model truck lol.

 

Hey Corey @moe2o4 you have become a celebrity here, good job, good job indeed. Keep it up brother!!!

 

I cleaned mine again.


Removed the V6 badge too.