What Have You Done To Your 3rd Gen Today?

What is that mount? could you link it?
It's a SWEET setup!

 

Put a set of Falken Wildpeaks AT3's on.

 

Thanks just figured out what BHLM meant!

 

Same as everybody else.

Rockymounts Clutch SD

RockyMounts Locking Clutch

https://www.amazon.com/gp/aw/d/B0028MRHBS/ref=yo_ii_img?ie=UTF8&psc=1

And some socket head cap screws and t-nuts

$19 Te-Co 41406T Black Oxide 1018 Steel Tapped Through T-Slot Nut, 3/8"-16 TPI, 5/8" Height x 7/8" Width x 9/16" Table Slot (Pack of 5)

https://www.amazon.com/gp/aw/d/B009SWGLHW/ref=yo_ii_img?ie=UTF8&psc=1

 

I'm excited for that winch mount. I'm assuming that means you lose the ability to mount an LED bar in the lower grille?

Hot hot and for how long did you bake these?

 

300F for 10 minutes. When they would cool down I'd put them back in for 2 minutes at a pop. The second headlight came apart first try. First one wasn't as easy.

 

No melted edges or trim pieces?

 

Definitely interested in the lights and witch mount!

 

Nope

 

Brick26 that truck looks sweet . Nice job well done !

 

Hey brick what kind.of driving lights are they and how much $

 

You mean the Halos? Morimoto 70mm XSB. 65 bucks for the pair plus shipping.

 

Got a magnaflow exhaust for the truck

 

No the lower driving light or fogs

 

Those would be the factory fog lights

 

I had my picture taken with a PRO

 

Ok sorry thats jt tacoma s truck the fogs look like four rock light in one pod

 

Be care full with wheels spacers because it pushes your wheels out creating a bigger turn radius of your tire. Have 285/75r16 on 4.5 BS w/ 0 offset and 3" lift and rubs body mounts turning and going over speed bumps.

 

Added the TRD Pro skid plate.

 

I like yours better, but I'm partial to white