Shop says I need a 2.7L to install a Magnaflow or Flowmaster?

So I have a 2.4L, 5 Lug, and they say I need a 2.7L to install a Magnaflow or a Flowmaster. What do I do, can I still install it?!

 

Yea you can still install it. Just go to a muffler shop that knows what they're doing.

 

Okay, is it also possible to install the whole system?

 

Yea. What they'll probably do is cut the head off (main can) and weld their own piping to it to make it fit.

 

Hope you're right!!

 

Yea. Just don't go to an American shop that does things by the book. Go to one of those Mexican muffler places and they'll get you going. Mufflers are pretty simple. The muffler shop will most likely chop the main can and custom bend some piping for you so it will fit.

 

@tcBob

 

Lmao! okay!!

 

They may have meant they don't carry a muffler with an inlet/outlet small enough to fit the piping on a 2.4L

 

A muffler is not called a "head."

 

They'll chop the head off and probably weld their own piping to make it fit.

 

Alright, hope you guys are right. I'll update this page in about a month or two. Pray this isn't a $400 plus mistake..

 

Would you guys buy the whole system or just the muffler?

 

If they make the whole system for the 2.4 then you should go with that. If not, just get the muffler and they'll use their own piping if you want.

 

Ive ran 3 different mufflers on my 2.4 never had anyone tell me it couldnt be done. They have head up their ass is issue