285/75R16 with a 3/2 leveling kit?

What's up Tacoma world, just got a quick question for everyone. I have a 3" front, and 2" rear leveling kit, with 1.5" wheel spacers on my truck, and was wondering if a 285/75R16 MT would fit without rubbing? Tryna avoid cutting.

 

Possible you may rub at full lock. If offroading you also may rub if you stuff the tire.


Welcome to TW!

 

I don't think I'll do that much off roading, maybe even none at all. But I don't understand what you mean about full lock?

 

Steering wheel turned all the way left or right.

 

But other than that, everything should be all good?

 

Should be. You running aftermarket UCA's?

 

So what would you recommend me doing in order to have no running at all?

 

265 or a 275 tire. 275 is going to be just a few tires that come in that size though. Don't know if a MT is available though. I know Dynapro comes in that size.

 

if anything I'll install the 285's for now and see if it rubs at all. If worse comes to worse, i'll have our local shop take a look at it, and if I gotta do some trimming, then I gotta do what I gotta do. Thanks for your input though, really appreciate it.

 

No problem man. Good luck with it. I'm running 285's and the slight rub at full lock doesn't bother me. I haven't put the spacers on yet though. I know when I do I'll have to do the cab mount chop.

 

Do you have a lift on yours? Even if I have to take the spacers off for it not to rub then I'll do it. I was thinking about going 265 75 16's but it isn't really much of a difference from my stocks, so I went 2"s bigger and they fill up the wheel well more. Looked sick to me, just worried about the rubbing. Hopefully once everything is done, I won't have to do too much with it.

 

I have a full 3" OME with Dakars.

 

Sick. I only have a supreme suspension leveling on mine, something simple.