Wheel Spacers?

It seems we are in agreement after all

 

Yeah I have a 4.5" BS wheel and nothing rubbed anywhere. I added 1.25" Spidertrax hub centric wheel spacers and ir started rubbing all over the inside of the wheel well and frame. These were in 265/75/16's w/ a 16x8 wheel. So I hammered away and fixed it to where there was no rubbing. So when you add spacers it takes away from your original BS, correct? I took the spacers off and sold them anyways now. I'm doing the tundra brake upgrade tomorrow and am hoping I have enough room with the 16x8's w/ 4.5" of BS. Can anyone answer that question for me? Will I have enough room for the larger calipers etc.?

 

Some 16s fit. Some dont.

 

That's gonna suck if they don't! They're Method double standards

 

Methods should be fine. 16s have more fitment issues on 05+ trucks, first gens can fit down to a 15.

Method Standards with the same 4.75 0mm in a 16 fit fine on my 2008 and my 2001 4runner

 

Hes putting tundra brakes on.

 

16" Methods SHOULD still be fine. I cant guarantee it but I believe 00-06 Tundras had a 16" option from the factory

 

I hope so. I put my finger between the spokes of my rim and the Tacoma caliper and my finger has an inch or 2 on each side. These are the wheels. I'm worried about the inner lip behind the fake bead lock taking up space which would push back the room I need. Here are the specs I just looked up.

 

I only have 4.5 not 4.75

 

should be fine, but its impossible to say without a test fit. 16s are kind of a dying size tbh