All Pro lifts

I was just curious what the thought were on this lift?

 

Looks good, can't really go wrong with bilstiens! Thy are a great ride!

 

Other than being out of stock, that is a pretty good setup.

 

That is what I have heard I haven't seen much though in the way of the All Pro leaf packs I was going to do add the expo pack to it.

 

Depends on what you plan to do with your truck. If you intend to actually get out into the outback and carry a ton of crap with you, then the expedition leaf packs would be a good choice.

 

Yes I do get out for some light wheeling and end result I will have a shell on all the time as well.

 

I've had All Pro expos on my truck for a couple years. Swapped out a set of Dakars and couldn't be happier. Lots of wheeling, loaded and unloaded. They're great. The Expo's are longer than stock though. You may need shocks and brake lines too. They are a bit stiff for totally unloaded driving. I usually keep a couple sand bags in the back to smooth things out when unloaded.

 

Yeah, well.. I have Dakars and will switch to All Pro when they wear out.

 

Thank you for the info when I do get them I will do the full lift with new brake lines. The All Pro springs is what I was wanting to hear feed back on and others experience with them and how the ride is with them so thank you.

 

I have an All-Pro rear suspension setup ordered with expo leaf packs. When i last contacted them, they told me they expect the leaf springs to be in stock by the end of the month (september). I can give feedback then.

 

Thank you

 

I have heared from a lot of members here about the "Dakar squeak" just wondering if you experienced this before you took them off, and do you have any squeaks with the All Pros?

 

I had dakars on an older 2nd gen and my last 1st gen. Never had any squeaks, but im sure with more miles there could be some. if you go with dakars, you might look into a bilstien rear shock to get the full travel out of the dakars

 

I am seriously leaning towards the whole package lift from All Pro the expos just seem more robust to me and I love the idea of the U bolt flip kit. When the kit I posted the link to is available I think its the one I am going to go with. Do you have any experience with th 6112 coil overs?

 

I have 6112 and all pro expos with fox 2.5 dsc shocks in the rear. I have a leer cap and wooded sleeping platform. Do not hesitate what so ever! This kit is great and you only need a huge rear shock for hard hits and jumps so its not necessary.

Get it!

 

Thank you I just looked at your pics that is exactly the look I am going for, nice rig! what size tires are you running.

 

IKR

 

I've built a few sets of 6112's when I worked at an accessories company. They are beefy indeed, if they offered a 650# coil I'd have gone that route instead of the 5100/886 route I went. But I would not hesitate to run them

 

Thank you

 

285/75-16 fn five star -25 offset and in order to fit them i needed maxtrac spindles. A normal offset scs, fn, method wheel and you will have rubbing that can be fixed with some cutting