What Have You Done To Your 2nd Gen Tacoma Today?

The paint that the 4x4 is on there with will eventually fade and speckle off. I scrubbed it off of mine. Then i ripped 3/4 of them off in the woods. Bough two more fronts and ruined one of them.

Now i have had my rokblokz for almost two years.

 

I've been looking at the rockblokz! They look pretty sweet and more flexible. I may just grab a set.

 

Installed some G-Tek door sill guards this morning. Glad to finally cover up all the scratches.

 

They're fantastic. I've beaten the piss out of them and only ever lost one screw. Emailed them to order some hardware and they upgraded me to their new black washers that look so much better

 

I need these

 

TL;DR: Made friend with old school welder in a run down shop who charged me half and will teach me how to weld for free.

Today I made quite the friend! I'm going wheeling tomorrow, so I wanted my BAMF CMC plates welded in for piece of mind, even though plenty of guys run it open. The shop I was originally going to have do it never called me back, so I swung by there yesterday only to find they're closed on Fridays. Whomp whomp.

I looked up other shops nearby, and came across one that had one review, called Rat Fab. Says they specialize in welding and motorcycle fabrication, so I figured I'd be in good hands. Swung by to find a run down looking shop that I questioned was even still in business. I wandered in and no one was around so I just kinda wandered around the shop announcing myself. Came across an old guy with a cane.

Long story short, his assistant did the work on my truck the next morning (today) and him and I chatted for a couple hours, then went and grabbed lunch. He's in his mid 70's and loved to talk, but his stories were great so I happily listened. He said if I ever want to learn how to weld, he'll happily teach me and I just pay for the supplies.

His assistant didn't clean up the welds on the second side because it started raining, and I could come back and use all his tools free of charge if I wanted to do it myself. Then he charged me $130 (2 hours) for a job that took closer to 3.5 hours.


I also mounted my shovel in a new place!

 

Crappy Photo but replaced the the driver side with a Corbeau FX1 pro seat! Will post a better picture soon!

 

They fit great, picked up all four at about $90. They offer a smooth version as well.

 

Idk bud I have the iPhone 6s I think it's the same size as your phone

 

Your my Twinkie but without front and rear bumpers

 

Ordered Dakars and Poly bushings!

My lift is now complete enough to install when the parts arrive!

(Already have 886s on ome shocks, ome rear shocks, relentless u bolt flip kit and rctaco extended brake lines)

 

Literally chatting with the wife right now about bumpers. I'm trying to get in on the SOS GB

 

sumosprings:







@DCSBFTMFW @ChadsPride

 

Lots been happening to my truck lately. Yesterday got my new headlights in. Before each side and after, much nicer. Just have to aim now they are way off.

Today started the front idler pulleys and tensioner. Out of the 4 bolts that hold the AC pump on the engine, the one that is screwed into the engine was cross threaded by Toyota and now I need to fix the hole and the bolt. But had the old tensioner out in 45 min so that's not bad. This is the bolt.

And a pic with the Idler out through the driver side wheel well.

 

I was way wrong about the price @Echodawg. He was nice and only charged me for two hours but it was a 3.5ish hour job. Cost me $140.

 

They don't let the tires stuff up in the wheel wells quite as much....but other than that. Still plenty of flex and give. Plus they don't let the leaf springs go flat every time you lay a #2 pencil in the bed

 

Finally put my ballin wood grain interior back in after the FJ tcase install.

 

Boiiiiiiiiing.





Not because bump stops; because boner.

 

https://www.tacomaworld.com/threads/sumosprings-as-bumpstop-for-lifted-2nd-gens.449827/

 

https://www.tacomaworld.com/threads/sumosprings-as-bumpstop-for-lifted-2nd-gens.449827/