Decal

installed new TRD decal, a few air bubbles. Will the sun help or is it to bad to sad.

 

can take a very small tip like of an xacto knife. and just give a very tiny press in center of the bubble and press the air out. the sun will help shrink it more and hide the tiny holes you pressed in. i had a few bubbles and did that with mine

 

Did you use water?

 

No

 

Ah, should of. The sun won't do much then. It will shrink the vinyl a little. Like the other user said, poke a small hole in the bubble and squeegee it out. Maybe use a heat gun or do it out in the hot sun. It won't be perfect but will be a little better

 

Thanks I was thinking doing that but didn't know if I had to act fast or do it after the sun heats it up.

 

i did it a few days later after I noticed them. the ones I had were very tiny bubbles.

 

I can't swear it will re stick but apply heat with hair dryer, remove decal, spray area with windex reapply and squeegee out air

 

I had some minor bubbles in my decals at first. Wait a few days and see if they work themselves out, mine did. If they don't, then try the pinprick/squeegee thing.

 

If I decide to redo I will use water next time its first time and like my wheels I'll do a better job next time. Thanks

 

It'll flatten in a couple weeks.

 

That's not bad, if you want it done quick take a hair dryer or heat gun. It'll come out

 

Mine looked great at time of application... next day.. some bubbles.. CBoy808 said leave it alone.. he was right .... 2 weeks later... all is fine... nice and flat..

 

FYI, It's actually "too bad, so sad".

 

Prairie, your soooo right thanks

 

Just messing with you. Maybe we can meet up sometime and share a beer while we ogle each others truck.

 

Actually .... it's "Don't Worry...Be Happy.."
Chill out and wait ... have a few beers...

 

I'd give it a week or so in the sun. If that doesn't work a pin prick may be all you need.