What Have You Done To Your 3rd Gen Today?

No idea what you're selling?

 

what size tire did you go with that you needed the spacers?

 

Lol sorry this was in reference to the post above regarding on board pressurized water kits

 

what size tires are you running?

 

Hey Neoogeoo, I am getting ready to have the same lift set-up as you, I have an OR, MGM too. How much lift did you get with the OME 885s? Is the front 5100s set at 0 and anything on rear besides 5100s? I am going to use 1" block in rear with 5100. How much over all lift and how is the ride? I will be running DuraTracs also. Good looking truck!

 

@Smitty4699 285/70/17

 

Installed a Draw-Tite front receiver hitch (sorry for the dark photo)....500LBS tongue weight, mostly used for my Cooler Rack for surf fishing.

Thursday the beach opens up for fishing, I'm going to be one of the first in line to drive on.

 

Put on some new shoes and got em dirty.

 

Is that in Costa Mesa? If so, my avatar is that location.

 

Thanks....I set the front billies at 0, once the spring settles I got 2 inches up front and I did the 1 inch blocks in the rear......rears are also 5100, the ride is still smooth..on my 2015 I had toytec boss and got a full 3 inches and vibration in the front drive....one of the reason I wanted to stick with 2 inch lift max.....good luck

 

Traded in the old plates for the new black CA plates. The full blackout will almost be complete when they get here.

 

Nice seat covers, which ones are those

 

...^^^... Nice seat covers ... you will like TW

 

Damn I spent weeks looking for another Red 3rd Gen Tacoma with the bronze countersteer wheels. Ended up settling with matte black... wish I went with bronze. Just finished painting the same grill and will be installing this weekend. Need a bumper and will be twinning!

 

Took in today to get tranny TSB, increase quick turn signal from 3 to 5 clicks, and evaluate grinding noise on certain turns ( lifted with Toytec kit).

Stevinson Toyota West wanted to charge me $62 to increase to 5 clicks and another $62 for "zero point calibration" since it had been lifted.

I called Groove Toyota and they said they would not charge for adjusting turn signal. Funny how Stevinson then offered to adjust turn signal free of charge.

 

i havent done anything with my 3 rd gen yet, aint got it,still waitn, anyway does anyone here know if Toyota is making the back slide window thats power standard equipment for the DCSB OR 4x4, & pro , i heard they were ?

 

Ok that so cool! I always said to my self that I wish toyota had done 4 or 5 clicks instead of 3 with the quick turn function. I'm guessing the technicians did it?

 

Haven't seen electric on any model as of yet. Personally, I feel that window is pointless. I'd rather have a solid glass back window.

 

I use to use the foam spray for shine look on tire but it flung every where and didnt last long, I tried this and it seems to work good and doesn't splatter and holds.

$24 SONAX Tire Gloss Gel 235200 | Long-Lasting Rubber Conditioner for a Semi-Gloss finish on Tires | Deep Black Revitalization with Silicone Protection | Cleans, Conditions & Repels Dirt for Weeks | 500ml

https://www.amazon.com/gp/product/B003UT1V38/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

 

Thanks Neoogeoo for getting back. I have seen alot of other trucks on here, but none with the exact set up as mine will be and the same truck as mine.