Ditch / Pillar Lights

CaliRaised, especially if you're local in California. Great product and price. I've got their 3x2 ditch lights and 21.5" light bar. Jake's the man, hit him up!

 

Caliraised for sure! Such a great price on the ditch pods, I'm super happy with them. I also have the bar mounted inside the bumper. All 3 do an amazing job.
I was hesitant but am real glad I pulled the trigger on them.

 

Can someone post pix with the hood open? How's the clearance? Thanks!

 

Not the best angle, but it's all I've got at the moment. Plenty of clearance, doesnt come close to hitting the windshield, even though it looks like it's resting on it here.

 

Nice thx for snapping a pix...

 

No they are not the same company. They are very much different. One is in California and the other Texas. Products look the same but Rago has an R in their brackets.

Let us know if you need any brackets or LEDs and we can get you setup!

Looks good @JGTacoma ! Make sure to get those night shots in of those lights! Let us know if you need bed rail brackets too. @Sleipnir has a pair of @ragofabrication corner brackets or you can use their single bed rail brackets too!

 

@CBI Offroad Fab has awesome mounts!

 

Thanks you, everyone who has our products!

 

Could you pm me some pictures and a review on how the 32inch stealth in bumper light bar works?

 

PM sent

 

Are there any detailed write-ups of the wiring process involved in running wires from the lights to the switch in the cabin, to the battery, etc.? I'm completely confident in installing the lights and the ditch brackets, but the wiring is like a different language to me....

 

its way easier than it seems. Just buy a wiring harness. I use this one.

KAWELL® 2 Legs Off Road ATV/Jeep LED Light Bar Wiring Harness - 40 Amp Relay ON/OFF Switch

https://www.amazon.com/KAWELL®-Legs...ie=UTF8&qid=1473788316&sr=8-15&keywords=2+leg

 

Thanks, that diagram makes it seem fairly simple. I'm assuming I can plug that harness into the cabin switch of my choosing instead of having to use the round one that looks to come with it?

 

I am sure you could wire it to another switch without an issue. I personally used their switch and it works fine.

 

Any switch can be used in of the wire harness switch, just cut it off and rewire.

Make sure to follow the wiring diagram for your specific switch.

 

Where did you get your switches from?

 

From ebay

 

Check out @OTRATTW

He's a vendor. Awesome switches with great support when you have issues.

 

how are you keeping these from being stolen?

 

Look at caliraised having to thread jack and put their two cents in here. I love my Rago fabrication brackets and freedom LED bars. Best price and for all you guys wondering who's is better would you rather have the knock off cali raised or the original Rago products. I chose quality everytime!