1996 1st Gen Tacoma - Parting it Out

LOL not yet.....somehow "knock on wood" we seem to luck out....but the next one should be here tomorrow or Sat...hopefully it stays North like they say and we should be ok

 

Spence8818, I'm not sure what you're describing. Send a photo of the part, or the name of it, or use my original photos and circle it. Is it in the engine compartment? Because the only things there are the brake booster and clutch fluid reservoir. Are you sure it's for 4x4? Because I have a manual transfer case.

 

Disregard all that, i ended up making my own. It's a vacuum surge tank that's located in the drivers wheel well on my 96 4x4 v6 taco

 

Still have the drivers seat?

 

SavageTacoma91, yes I still have it. The side trim has been removed and there is a tear in the foam from use.

 

HOW MUCH FOR THE HOOD??!?!?!!!

 

interested in the mudflaps, hood, and front bumper message me for negotiations ?

 

Any chance you are interested in selling the bottom seat brackets? Both sides?

 

How much for the roll n lock bed cover shipped to 29842? Also is the rear part of the console still available?

 

Cosman, sorry for the late reply, I didn't see your post. Maybe just the passenger seat for now since I still need to move the truck around. Would you like just the passenger side?

 

Yes! Any chance you can snap a pic and send it? I would definitely take one side for now

 

BadTaco, for the Roll-N-Lock I think it'll cost about $300 for the part and shipping total. The rails need paint and the aluminum clamps need to be drilled and retapped (they welded themselves together). The lock doesn't lock, but it does latch to the tailgate. The lock may just need a good cleaning. I have photos somewhere that I can send.

The center console (between the seats) with the lid has been sold. Is that the part you wanted?

 

how much for rear bumper mounts?

 

Do you have the entire antenna assembly? I'm looking for the antenna, the whole base part behind the fender, and the wire including the plug at the back of the radio. Thanks!

 

Its all good, Ill pass on the cover..Thanks

 

3rYODA, the rear bumper is in real bad shape due to significant rust; which parts specifically? The two pieces that bolt from the frame to the bumper?

 

crazy joker, yes I have the antenna assembly. I recall cutting the coax because I don't remember there being a coax plug to the radio.

 

BadTaco, no worries. I do recommend the cover (a new one), by the way. It's really nice and extremely convenient.

 

Yes those are them, and I only need them for a reference I can take mine off but I'm not looking to go through all that and would rather buy a pare and make my own rear bumper

 

10-4. Thanks anyway.