New England B.S. Thread

Lol

I'll say what the others are thinking. Is she cute?

 

i wasn't thinking that

 

Sat on the fence for a bit but just pulled the trigger on a FluidFilm kit. I swung for the 2-gallon, figured I'll hit my girlfriend's Subaru and probably disassemble and hit the inside of my steel bike frames over the winter as well.

 

@Bruce988jl

I have the TC UCA on my taco. I replaced my uniballs after a few years of use. It was incredibly easy to do. When my new frame is in my trucks suspension is changing pretty drastically...

You should do a new leaf pack to pair with any new coil over setup you have up front. All of the articulation you'll manage to achieve out of these trucks will be through the rear. The fronts pretty limited without going to a long travel setup. You might squeeze a little out with a better UCA, but not a lot. Also removing the sway bar is buttery!

 

Why not?

 

Check out the LT threads. With the spring under the axle and a shackle flip, you can really gain a lot of travel out of the rear. What I don't know is at what point that means you'll require limit straps.

I call B.S.

 

Anybody got any suggestions on plug-and-play LED replacement headlight bulbs? It's got LED fog lamps and they're brighter than the actual headlights, lol. I want something brighter than the standard halogen but I don't really want to go with Xenons because they don't last very well and I don't want to have to buy $100 in lights twice a year. I've done a little bit of searching online and all I can find is the usual batch of weirdly-named Chinese crap (like DongZhen, CougarMotor, LEDKingdomUS, etc)

@Pugga , since you're a light freak.

She's not bad. Face is average, I suppose. Definitely got a 22 year old's body, though. And she's been running around in a tank top and short shorts for her whole visit. So that's been a pleasant distraction. When I'm not hung over, at least, haha!

You liar!

 

lol you're in the LI fb page where evan mentioned it first.... realistically it prob won't go down, but he is trying so we gotta help

 

Hmmmmm a cousin in Maine?

 

I hear they got more people than teeth up there.

 

Not my cousin. I can look

Yep.
Just like Massachusetts has got an abundance of as*holes and a dearth of common sense

 

At least its not New York i think we can all get behind that one.

 

Except Alex, lol

 

well he is a transplant, i would be horrified if he chose to live there for life.

 

I thought I had read that he was thinking about moving to NH?

 

The late night is always the fun part, especially when liquid is involved..

Since nobody else said it..

 

Not sure but if I recall correctly the NY was while Ari was in school..she was at the meet at Foxboro about this time last year before he moved.

 

Oh Fuck! I just moved to NH!

 

LOL

 

http://www.4x4truckleds.com/

Those guys seem well liked over in the F150 forums. Personally, I'm not a fan of LEDs in a housing not made for them. Those guys seem decent but still have some light scatter. That said, that link above seems to have decent reviews from what I've seen. He's active on the F150 forum and seems to help members quickly if they do happen to have an issue with one of his kits.