Jacksonville area Tacos..

shitty man!!

 

I think one of the lights didnt have a good connection to begin with so i just resodered it and they work. So it wasnt too bad.

 

how long do you need to let the headlights dry b4 you put them back together? and how long b4 you can drive with your wheels painted?

 

headlights maybe 2 hrs. The wheels alittle longer but we can start the wheels and get them going and while it dries do the BHLM. So should be that bad.

 

hmmm might come out. i need to do some trimming on my bed

 

Yeah man come on out. I just ordered more LED's i might change up the colors in my dash. Might do something alittle different than the blue/green. Got 40 of the for $23 w/ shipping.

 

i found a site awhile back that i got 50 for 7 bucks. cant find it now.

 

yeah that would be nice.

 

Should be a nice turn out. Guess this will be the First Jax mod day.

 

Sweet. This should be fun tomorrow. I look forward to it.

 

i think fghtngsquirrel was just behind me on beach at st johns luff

 

Yep saw you!

 

So we got all the paint be need?

 

Does anybody have a 21mm x 3/8ths or 1/2 socket. because that's what I read was our lugnut size and all I have is 19mm. Also the service manual said torque to 83 ft lbs but my torque wrench only goes to 75. I guess we could still use it and guess the last couple of ft lbs.

 

I will bring my air compressor and impact gun and stuff. I have the right size for the lug nuts in impact sockets.

 

I have a compressor and impact wrench I just don't have the 21mm socket. I have a 7/8 iirc that seems to fit but I don't want to try it. I guess if we have two compressors and guns we could do it twice as fast

 

i carry a 2-3ft breaker bar with a 21mm socket on it at all times . i need to rotate my tires and try to do some more cutting on my bed. anyone have a dremel? i cant find mine.

 

I do but its cordless. i will bring it anyways. It will be fully charged.

 

Yes. I have a dremel. What attachment do you need? Also I have an angle grinder with a cutoff wheel if you need to cut that much.

How's your pup doing?

 

21mm is more equivalent to a 13/16 socket. but 7/8 will usually work, but after awhile it will cause the lugnuts to start getting worn out and get stuck in the socket.