AZ BS Thread 4²0

I see.

So is it the height of the top of the seat down to the base of the tube? (where it connects to the rest of the frame)

 

Best way is to go to a bike shop and sit on a few, although height is a good way to guesstimate, everyone has different length legs and torsos. You pretty much want almost a straight leg on a down crank, and when at the top it should be essentially like a 90 degree bend knee is parallel with the frame and feet straight on peddle not bent or crooked. Then you can make adjustments like stem and handlebars if it feels like your top half is to angled because of height and so on.

 

Thanks!

 

Verizon? How much

 

@snowtank whay did you have done? I saw @Milota95 had you whip.

 

I have a MotoX Pure unlocked 64gb that is for sale. Universal banding so it will work on all carriers, all LTE. 5.7" screen, metal body with IP67 rating, 21MP camera with 8MP secondary, both have flashes. MicroSDHC slot up to 200gb. Marshmallow 6.0. Great phone. About 8 months old.

 

Niiiiice!
We did the same for the Tundra and love that spot - super clean.

 

Oh btw, as a heads up in the MTN bike department. If anyone needs help, I used to race 3 series: DH, enduro, and XC. I still ride quite a bit on my all mountain rig. I got all the tools and bike stands of you need help as well.

 

I would echo this. Never drop a ton of coin on your first bike. Start cheap to determine if you are even going to like it. Aside from that, your first bike will get beat to hell so something with a deore or x7 groupo will be just fine.. I started with a 1k $ bike and a dozen or so bikes later, all 3 of my bikes are custom built and much much more expensive than my first.

 

200.00 cash money dollars.

Comes with an Incipio case and two factory bumpers shells. Condition is 9/10.

 

It would be a 10/10 if not for the fluids I splashed on it watching midget action.

 

That cost extra