1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Rear Shock options from smaller lift (Progressive AAL) Need help with a control arm bushing part number Replacing Control Arms & Brakes @ 161K, what else should I do while it's torn apart? Alternative to extended 5100s... Does A Front locker Require Re-gearing? Shocks for a heavily modded 05 lifted Tacoma? (lots mods)

Maxtrac Spindle Lift for 2nd Gen Prerunners

Discussion in 'Suspension' started by markmatters, Feb 11, 2012.

Page 421 of 688
  1. Sep 21, 2016 at 5:01 PM
    #8401
    Timbo's Customs

    #8401
    Timbo's Customs Well-Known Member

    Joined:
    Aug 8, 2013
    Member:
    #110078
    Messages:
    7,266
    Gender:
    Male
    First Name:
    Timothy
    Lakeland FL
    Vehicle:
    2019 f250 6”lift 37s deleted 1997 T4r, tons and 4ds
    1997 t4r has super duty axles, 5.13s locked front and rear. 3 link front with 14" kings. Rear 63s.
    Timbo's Customs, Sep 21, 2016
    #8401
    ChadsPride likes this.
  2. Sep 21, 2016 at 9:02 PM
    #8402
    JoseyWells

    #8402
    JoseyWells Well-Known Member

    Joined:
    Dec 27, 2011
    Member:
    #69448
    Messages:
    365
    Gender:
    Male
    First Name:
    Joe
    Corona, CA
    Vehicle:
    12 prerunner
    Demello sliders, Icon ext coilovers, icon rear shocks, icons UCAs, 17" Konig Countersteer Type X, 285/70/17 Nitto Trail Grapplers
    got my spindles installed tuesday :thumbsup:
     
    JoseyWells, Sep 21, 2016
    #8402
    ChadsPride likes this.
  3. Sep 21, 2016 at 9:08 PM
    #8403
    JoseyWells

    #8403
    JoseyWells Well-Known Member

    Joined:
    Dec 27, 2011
    Member:
    #69448
    Messages:
    365
    Gender:
    Male
    First Name:
    Joe
    Corona, CA
    Vehicle:
    12 prerunner
    Demello sliders, Icon ext coilovers, icon rear shocks, icons UCAs, 17" Konig Countersteer Type X, 285/70/17 Nitto Trail Grapplers
    CAM00268.jpg CAM00270.jpg CAM00280.jpg

    CAM00284.jpg

    A little nose high but its alright

    Front: Maxtrac spindles, Icon Ext Coilovers

    Rear: Dakars, Icon Rear Resi CB2036

    Tires 285/70/17 nitto trail grapplers
     
    JoseyWells, Sep 21, 2016
    #8403
    Bird33, Midnighttaco08, Bot_Chu and 6 others like this.
  4. Sep 22, 2016 at 3:44 AM
    #8404
    ChadsPride

    #8404
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    That looks bad ass!!! Did the Icon coilovers give you extra lift up front?
     
    ChadsPride, Sep 22, 2016
    #8404
    White Horse likes this.
  5. Sep 22, 2016 at 3:55 AM
    #8405
    JoseyWells

    #8405
    JoseyWells Well-Known Member

    Joined:
    Dec 27, 2011
    Member:
    #69448
    Messages:
    365
    Gender:
    Male
    First Name:
    Joe
    Corona, CA
    Vehicle:
    12 prerunner
    Demello sliders, Icon ext coilovers, icon rear shocks, icons UCAs, 17" Konig Countersteer Type X, 285/70/17 Nitto Trail Grapplers
    I didnt measure what the icons added. I just left them the way I had before the install
     
    JoseyWells, Sep 22, 2016
    #8405
    ChadsPride[QUOTED] likes this.
  6. Sep 22, 2016 at 4:03 AM
    #8406
    ChadsPride

    #8406
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    Youve got a really nice clean looking truck man. Mad props!!! :thumbsup:
     
    ChadsPride, Sep 22, 2016
    #8406
    White Horse likes this.
  7. Sep 22, 2016 at 4:19 AM
    #8407
    SpruceTaco

    #8407
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Turned out great! :thumbsup: :woot:
     
    SpruceTaco, Sep 22, 2016
    #8407
    White Horse and JoseyWells[QUOTED] like this.
  8. Sep 22, 2016 at 4:19 AM
    #8408
    SpruceTaco

    #8408
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    What were they at before the spindles?
     
    SpruceTaco, Sep 22, 2016
    #8408
    ChadsPride likes this.
  9. Sep 22, 2016 at 4:22 AM
    #8409
    ChadsPride

    #8409
    ChadsPride Tacoma Owner & Enthusiast

    Joined:
    Nov 26, 2014
    Member:
    #143119
    Messages:
    127,312
    Vehicle:
    Sponsored by TacomaWorld.com
    :amen:
    I want to guess around 2.5 inches.
     
    ChadsPride, Sep 22, 2016
    #8409
  10. Sep 22, 2016 at 4:25 AM
    #8410
    SpruceTaco

    #8410
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    If they were at 2.5 then he ended up with 6.5. Whatever lift he had before just add 4" for the spindles.
     
    SpruceTaco, Sep 22, 2016
    #8410
    White Horse and ChadsPride[QUOTED] like this.
  11. Sep 22, 2016 at 4:34 AM
    #8411
    JoseyWells

    #8411
    JoseyWells Well-Known Member

    Joined:
    Dec 27, 2011
    Member:
    #69448
    Messages:
    365
    Gender:
    Male
    First Name:
    Joe
    Corona, CA
    Vehicle:
    12 prerunner
    Demello sliders, Icon ext coilovers, icon rear shocks, icons UCAs, 17" Konig Countersteer Type X, 285/70/17 Nitto Trail Grapplers
    Do you have spacers for the rear tires?
     
    JoseyWells, Sep 22, 2016
    #8411
    ChadsPride likes this.
  12. Sep 22, 2016 at 5:33 AM
    #8412
    SpruceTaco

    #8412
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Yeah 1.25", they even it up pretty nice.
    20150313_185031.jpg
     
    SpruceTaco, Sep 22, 2016
    #8412
    JoseyWells[QUOTED] and White Horse like this.
  13. Sep 22, 2016 at 5:47 AM
    #8413
    tacoma09medic

    #8413
    tacoma09medic ParaPUP09

    Joined:
    Dec 10, 2012
    Member:
    #92843
    Messages:
    196
    Gender:
    Male
    First Name:
    Tom
    Franklin
    Vehicle:
    2011 Taco, 4 inch lift, 315/70/17, all-pro armor front and rear, ARE Z series, bed lights, Tint, Rigid LEDS
    To much
    I know it's a popular setup with the spindles so I figured I'd ask. Next week I will be putting my billies it 0.85 and my spindles for the front and I will have my dakar pack in the rear. 285/70/17 is my new tore size. Wondering if anyone had a pic that has this setup
     
    tacoma09medic, Sep 22, 2016
    #8413
    ChadsPride likes this.
  14. Sep 22, 2016 at 11:40 AM
    #8414
    CodyTaco

    #8414
    CodyTaco Well-Known Member

    Joined:
    Jul 27, 2016
    Member:
    #193098
    Messages:
    130
    Gender:
    Male
    First Name:
    Cody
    Vehicle:
    2013 dcsb sport spruce
    Gonna head to discount and pick up new wheels and tires tomorrow. For you guys running 35s. How close are you to the upper control arm? I'm planning on getting a 9" wheel with -12 offset. Planning on doing the pinch weld and CMC this evening.
     
    CodyTaco, Sep 22, 2016
    #8414
    Tepen1987 and ChadsPride like this.
  15. Sep 22, 2016 at 11:50 AM
    #8415
    SpruceTaco

    #8415
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    It's hard to see but it's above my tire. I have the spindles + 3", so 7". My rims are 17x9 -12 offset & have 4.5" backspace.
    Screenshot_2016-09-22-14-46-21.jpg
    I haven't done the cmc or pinch weld yet.
     
    SpruceTaco, Sep 22, 2016
    #8415
    White Horse and CodyTaco[QUOTED] like this.
  16. Sep 22, 2016 at 11:53 AM
    #8416
    CodyTaco

    #8416
    CodyTaco Well-Known Member

    Joined:
    Jul 27, 2016
    Member:
    #193098
    Messages:
    130
    Gender:
    Male
    First Name:
    Cody
    Vehicle:
    2013 dcsb sport spruce
    Pic helps, thanks. I was in visioning the tire sitting above the top of the spindle. And was wondering about the clearance from the back of the tire sidewall and the uca where the ball joint is. But clearly it doesn't matter since the spindle top is way above the tire even with 35s. Thanks!
     
    CodyTaco, Sep 22, 2016
    #8416
    ChadsPride likes this.
  17. Sep 22, 2016 at 11:56 AM
    #8417
    SpruceTaco

    #8417
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    No problem! I edited my post with my rim specs.
     
    SpruceTaco, Sep 22, 2016
    #8417
    ChadsPride likes this.
  18. Sep 23, 2016 at 4:39 PM
    #8418
    CodyTaco

    #8418
    CodyTaco Well-Known Member

    Joined:
    Jul 27, 2016
    Member:
    #193098
    Messages:
    130
    Gender:
    Male
    First Name:
    Cody
    Vehicle:
    2013 dcsb sport spruce
    Well got the 35s stuffed in there. Could barely get out of the parking lot without hitting the cab mount. A couple hours of grinding and slamming a BFH... Boom! Almost no rubbing at all. Just a hair at full stuff.

    IMG_20160923_160358.jpg
    20160923_111222.jpg
     
    CodyTaco, Sep 23, 2016
    #8418
    LowRpmCruise, 671taco, JoseyWells and 2 others like this.
  19. Sep 23, 2016 at 4:43 PM
    #8419
    SpruceTaco

    #8419
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    Looks good, how much total lift do you have, you probably said already but I'm too lazy to look for it. Haha
    I only needed to trim plastic when I was at 6.25"
     
    SpruceTaco, Sep 23, 2016
    #8419
    ChadsPride likes this.
  20. Sep 23, 2016 at 4:47 PM
    #8420
    CodyTaco

    #8420
    CodyTaco Well-Known Member

    Joined:
    Jul 27, 2016
    Member:
    #193098
    Messages:
    130
    Gender:
    Male
    First Name:
    Cody
    Vehicle:
    2013 dcsb sport spruce
    Thanks man. Just the lift from the spindles. So 4". Bilstein are set at 0. But I always clearance everything to full stuff. A lot of the trails here. While relatively easy(at least the ones the taco sees) are really rutted out and I'm always touching bump stops. I wouldn't have had to trim much offor the cab mount if I didn't off road it.
     
    CodyTaco, Sep 23, 2016
    #8420
    Tepen1987 and ChadsPride like this.
Page 421 of 688

Products Discussed in

Air Intake Snorkel Kit Fit For 2005-2015 Toyota Tacoma With 4L Right Petrol intake air snorkel kit high performance system compatible kit Replacement black Rotational Molding (2005-2015)
$89.99
Spicer 5-1330-1X U-Joint Kit
$34.95
Maxtrac Suspension (716920) 2" Rear Lift Shackle for Toyota Tacoma
$93.27
Hooke Road Tacoma Double Cab Top Roof Rack Aluminum Crsssbars for 2005-2023 Toyota Tacoma 2nd 3rd Gen Truck, Cargo Carrier Basket (Double Cab Only)
$349.99
MaxTrac K886842 Suspension Lift Kit w/Shocks 4 in. Lift Incl. Front Spindles With Brake Lines/Rear Blocks/U-Bolts/Rear MaxTrac Shocks Suspension Lift Kit w/Shocks
$909.67
Spidertrax WHS007 Blue Wheel Spacer Kit
$147.50
FUEL OFF-ROAD D564 BEAST 17X9, 6X5.5, 4.53, -12mm MATTE BLACK DOUBLE DARK TINT - D56417908345
$381.00
Old Man Emu D29XL Leaf Spring
$81.89
QSA 4" Lift Spindles (2WD ONLY) + Extended Brake Lines. Compatible with: 2005-2022 Toyota Tacoma (6 Lug/Prerunner)
$445.13
Bilstein 24-186728 5100 Series Rear Shock fits 2005 2023 Tacoma 4WD with 0-1" Lift - Monotube Design, Fade Free Performance, Optimal Performance
$103.95
To Top