What have you done to your Tacoma today? 1st Gen Edition

Getting an alignment in the am. Running camburg uca's and around 2.5" of lift. What specs should I tell them? From what I've searched real quick I should ask for
Toe:0
Camber:0
Caster: over 2.4
This seem right?

 

Wouldn't be pissed if those were my specs, haha. My camber is fucked in the front though so as long as your cams all work those numbers should be bueno.

 

thats what I've read

 

My cams are all frozen, that's why I'm refreshing the entire front end this winter. Got all new LCA bushings, ball joints, coilovers (used), OEM cams (used but in perfect condition) probably gonna do UCAs too because the stock ones can't handle extended travel

 

Lol. Absolutely nothing.
I havnt driven it in 2 weeks. But im ordering a softopper for it in the morning.

That should make up for leaving it so lonely.

 

Just lowered my driver side co by .25" on the threads. God damn it they rode stiff with 2" of threads showing. Didn't even feel like the same suspension.

 

What do you mean by bigger? Larger bore diameter?

 

Yea.

My 03 stock one was 13/16"

Got a dual diaphragm booster with a MC from a 97 taco. It was a 1" mc.

Put a t100 heavy duty mc on the dual booster. It's a 1-1/16" bore.

 

Took a trip down memory lane. Got bored and looked at some of my 4 year old post. I was such a peasant back then. Now I'm just a broke peasant.

 

Don't you hate when you try to improve something yet you only make it worse lol

 

Brutal.

 

Story of my life

 

Get that turd gen outta here

 

Well I finally know what clutch smells like. I burned it up going through some really rough stuff and thick mud. Though the clutch was old to begin with. Oh well no other damage and truck is getting a new clutch as soon as I find the one I want lol. Any really good aftermarket ones for these trucks?

 

Im about to do the replace the chrome part of bumper and clean and protect all iron there, 2 Q the wire for lights do u just pull to unplug? The star look screws , can"t see the right head of screwdriver that fit ? I know , im not into even begginer lever

 

I guess u already know about 10% going on this month on group buy softoppers.., got to pass by $ 4 now

 

make sure the calipers are on the correct sides and upside up with the bleeders on the top ...

 

Pass buy what?

 

FIFY

 

My drain comes out easy because I can sneak my impact in there. Mines rated for 600lbs though. My fill plug was my issue recently and I can't get an impact in there AND almost stripped it out with an allen head on my ratchet. Only way I got it to open was hold a pry bar on the head of the ratchet to hold it in place (so it doesn't strip further) and tap the ratchet arm with a hammer.