What Have You Done To Your 2nd Gen Tacoma Today?

I did this one.
https://www.tacomaworld.com/threads...no-splicing-no-bending-100-reversible.309407/

 

Pretty positive my wheels are the same specs. 16x8, 4.5 BS, 0 offset.

No issues with mine, but I'm lifted 2.5/2.75 up front with 265/75/16 Cooper ATP.

 

Did some trimming to my wheel wells/front fenders. There is no scrubbing now-except for the body mounts. *Grumble grumble* I've ground them down a lot, but I'll have to just bite the bullet and chop them if I ever want ZERO scrub. Next mod will be a Front bumper. I really like ARB's Been on all my other trucks, but I would like something a little lower profile. I was thinking either a CBI or Pelfreybuilt. Anyone have bad experience with either of these bumpers?

Anyway pics or it didn't happen:

 

If you look at your valve stems you will notice a zinc'd nut around it. That is what holds the sensor to the valve stem hole in your wheel. When you pull the old tires or air down and break the bead you can simply unthread that nut - 10mm as I recall - and use it in your new wheel if that wheel allows it to fit.

 

Ran that size with 265/70r17 on stock suspension. All I had to do was remove mudflaps and the mini mudflaps up front and didn't rub.

 

I found a way to take down the spare tire way faster than using the oem "crank" in the kit.

I noticed that a 14mm socket fit pretty well on the tip of the bars in the kit. So I put my drill on it and took it down!

For those like me who carry a bunch of tools everyday for work can find something useful in this!
If my drill is not in the truck I can still use my ratchet.

 

This was mine for awhile, now it's my son's. It's amazing how much you can cram into it. And, it's like driving a gokart

 

Washed her

 

Got the final odds and ends taken care of before getting traded in tomorrow. Goodbye ol' buddy ol' pal!

 

RIP!!!!!!

 

You can use the same thing on the scissor jacks tat come in most cars, redneck race jack

 

What u trading it in for?

 

Honestly I tossed that thing in the scrap pile long ago!

 

Subaru.

 

This bad boy! 2016 Subaru Legacy Limited 2.5. I'd obviously prefer to keep my truck, but this isn't so bad. I just need a more commuter friendly car

 

Got the kmc xd 126 and bfg ko2's. I can hear some noise but it might be the sticker that was on the tire thread

 

For the first time since I bought it 6 years ago it has a tailgate thanks to a donor vehicle that's no longer road worthy. Debadge and paint to come.

 

I took mine to Maaco 3x and it still doesn't match. Just an FYI

 

Thanks for the heads up! Ended up selling the shell.....and the truck.