heres my system

what i have is focal 165krx3 up front focal 165krc in the rear 2 jl 10w3v3-2 subs pioneer dex-p99rs deck from japan
may amps are all linear power heres the list 1. 652iq for my front tweeters 1. 2202iq for my front mid base 1. 4503iq witch runs my front mid range and my rears and a 5002 for my subs
let me know what you think

 

Looks nice. Are you in a competion with that?

 

Looks cool. But I have no idea what that is.

 

did you make an enclosure for the sub in the door?

 

I'd imagine that he did. If he didn't then the sub would be blowing up that rear speaker it shares the door with.

Also, to the OP...why on earth are you running rear speakers?

PS: Nice source. Copper chassis FTW!

 

Got some build pics of the rear doors and box in there?

 

the rear dore panels are made buy extreme creations and are all fiber glass the only comps i do is local stuff nothing big and the rears are turned down so low you don't even know that there on also the hole truck is covered from top to botom with 2 layers of dynamat

 

no pics of the rear dores if i take them off agin i will take some

 

I'd be curious on the doors myself. you definately have some tasty gear there. I VERY good friend of mine is from the Denver area, he is an IASCA SQ judge as well, im sure if you want some tuning help he wouldnt mind.

 

whats his name?

 

Let me know if your interested and I can hook you up with him. PM me....not sure if he will help for free or not, but he is an enthusiest and it wont be much IF he charges you.

 

If you have them out I'd for sure like to see a pic of them. Do you know if any cutting of the inner frame was required? That would be an excellent spot for a sub and not loose any space.

 

http://www.xtremekreations.com/fabrication.html

 

Ya or ask the shop if they took some build pics?

 

heres the amp rack

 

what are each one of those amps rated at?

 

Hold up, those amps have their heat sinks almost completely suffocated by the rack/carpet. That looks good but is certainly a no no.

 

so, im not audio expert. but i do know some.. that looks dopeass
i only have one question. what kind of price range was all this?

 

as far as heat there are 2 3inch fans behind each amp each one has its own thermostat set at 85 degrees and the none of the fans have turned on and i ran it hard for a hole day the amps don't have to work hard because theres no crossover starting from the top the 652IQ is rated at 35.2x2 at 4ohm but with the mods is Putin out 50x2 the 4503IQ is rated at 50x4 at 4ohm but is Putin out 85x4 with the mods the 2202IQ is rated at 110x2 at 4ohm but is Putin out 165x2 with the mods the 5002 is rated at 250x2 or 500x1 at 4ohm but with a tun of mods its Putin out 995x1 at 4ohm mono

 

as far as price the deck was 1200 the front speakers were 1800 the rears were 500 the 5002 was about 700 the 4503IQ was 600 the 2202 was 500 and the 652IQ was about 300 with mods 4 bulk packs of dynamat at 145 each 200 in the amp kit 300 in rcas 2 yellow tops at 200 each and 600 for a 270 amp alternator so rounding it all off about $7680