Found out leaf broke while installing 5100,what should i do

Installing bilstein 5100 front and starting to take apart rear leaf found out my middle leaf broke and now im stuck with AAL's
Option 1 find local spring shop (if any) and get replacement just the one that broke
Option 2 buy leaf pack one side,will it be unbalance on my rear since just new one has alot of pressure?
Option 3 buy lifted leaf pack,but my bilstein 5100 with stock springs only 2.5" lift while the smallest pack i saw on 4wheelparts is 3.5 lift
I dont wheel or play mud at all just work 45min one way

Truck is 96 taco 4x4 6cyl
Im open to any suggestions thanks in advance

 

Option 4, junkyard?

 

4 junkyard here none of them have tacoma

 

This! Best option in your situation.

 

and yes you need 95-97 specific leafs if you havent already found out.

 

Check General Spring out of Kansas City

 

whatever you do, replace them as a set. not to mention, if one broke then the other one might be about to break as well.

springs flatten over time so if you go used, then get both so they sit level, otherwise it will have a permanent lean to it

I second the general spring new HD leaf spring option (the 2wd prerunners and 4wd use the same leafs)


http://www.generalspringkc.com/product_p/90-173hd.htm