1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Back Up Light Installation Link and BS Thread Plug N play harness to relocate USB port. OEM Rotors Part # 43512-04052 Discontinued? (Probably just Back Ordered) Bed Mat. Rough country vs Toyota factory? Suggestions, 2020 Non JBL speaker/Tweeter upgrade without adding amp 2017 Tacom rims- recognize these

CB specifics

Discussion in '3rd Gen. Tacomas (2016-2023)' started by johntoyota, May 31, 2016.

Page 21 of 81
  1. Oct 6, 2016 at 6:39 PM
    #401
    ExplorHer

    #401
    ExplorHer Question Authority

    Joined:
    May 2, 2016
    Member:
    #185889
    Messages:
    822
    Gender:
    Male
    Near Pittsburgh
    Vehicle:
    2016 4cyl, 5MT, 4x4, 2 seats, dents, & rust
    When you unplug your CB you get a transfer case shift lever?
     
    ExplorHer, Oct 6, 2016
    #401
    Lord Humongous, Hobbs, wtf and 2 others like this.
  2. Oct 6, 2016 at 6:41 PM
    #402
    Lost In The Woods

    #402
    Lost In The Woods 4 out of the 5 voices in my head say go for it!

    Joined:
    Jul 11, 2016
    Member:
    #191800
    Messages:
    1,394
    Gender:
    Male
    First Name:
    Eric
    Buckley, WA
    Vehicle:
    21 Gladiator Rubicon Diesel
    An unusually high amount of pinstriping.
    They are from Rago Fabrication. Would definitely recommend them. It's not a direct fit. The bracket will need to be drilled out some to get the antenna to fit.
     
    Lost In The Woods, Oct 6, 2016
    #402
  3. Oct 7, 2016 at 6:01 AM
    #403
    ROCdermody

    #403
    ROCdermody Well-Known Member

    Joined:
    Oct 15, 2015
    Member:
    #166740
    Messages:
    1,037
    Gender:
    Male
    First Name:
    Steve
    Vehicle:
    '16 Quicksand DCSB TRD OR
    Right? It's like Chris Angels truck... I see what's happening, but I don't know what's happening...
     
    ROCdermody, Oct 7, 2016
    #403
    Ritchie likes this.
  4. Oct 7, 2016 at 6:11 AM
    #404
    ROCdermody

    #404
    ROCdermody Well-Known Member

    Joined:
    Oct 15, 2015
    Member:
    #166740
    Messages:
    1,037
    Gender:
    Male
    First Name:
    Steve
    Vehicle:
    '16 Quicksand DCSB TRD OR
    Cool setup. Here's what I ended up with...
     
    ROCdermody, Oct 7, 2016
    #404
    LadyRed, Toyota Kawasaki, Ritchie[QUOTED] and 3 others like this.
  5. Oct 7, 2016 at 9:35 AM
    #405
    Ritchie

    #405
    Ritchie Well-Known Member

    Joined:
    Dec 24, 2012
    Member:
    #93649
    Messages:
    1,931
    Gender:
    Male
    San Diego (North County)
    Vehicle:
    RC Step side Pre-runner
    2.7 w/auto, 4WU 3 link, F & R Diamonds, ARB's F/R w/ Yukon 5.29's, Inchworm 4.7 Lefty, Deavers, ARB OBA, Schrockworks up front.
    Thanks.
    That is nice what you've done there. What is the length of the antenna? I had to go to a shorter antenna due to it hitting my car port... still works great on the trails and doesn't hit branches/ trees.
     
    Ritchie, Oct 7, 2016
    #405
  6. Oct 7, 2016 at 9:36 AM
    #406
    Ritchie

    #406
    Ritchie Well-Known Member

    Joined:
    Dec 24, 2012
    Member:
    #93649
    Messages:
    1,931
    Gender:
    Male
    San Diego (North County)
    Vehicle:
    RC Step side Pre-runner
    2.7 w/auto, 4WU 3 link, F & R Diamonds, ARB's F/R w/ Yukon 5.29's, Inchworm 4.7 Lefty, Deavers, ARB OBA, Schrockworks up front.
    Yeah... doesn't everyone? lol
    The first pic is prior to SAS.
     
    Ritchie, Oct 7, 2016
    #406
    ExplorHer[QUOTED] likes this.
  7. Oct 7, 2016 at 9:57 AM
    #407
    ROCdermody

    #407
    ROCdermody Well-Known Member

    Joined:
    Oct 15, 2015
    Member:
    #166740
    Messages:
    1,037
    Gender:
    Male
    First Name:
    Steve
    Vehicle:
    '16 Quicksand DCSB TRD OR
    It's a 102". The front tie down took a few weeks to figure out, but there's very little contact between the antenna end and the roof anymore.
     
    ROCdermody, Oct 7, 2016
    #407
  8. Oct 7, 2016 at 11:17 AM
    #408
    foy1der

    #408
    foy1der Well-Known Member

    Joined:
    Sep 18, 2016
    Member:
    #197597
    Messages:
    570
    Gender:
    Male
    First Name:
    W1FOY
    Vehicle:
    2017 OR DCLB
    What did you use for a mounting bracket?
     
    foy1der, Oct 7, 2016
    #408
  9. Oct 7, 2016 at 11:37 AM
    #409
    ROCdermody

    #409
    ROCdermody Well-Known Member

    Joined:
    Oct 15, 2015
    Member:
    #166740
    Messages:
    1,037
    Gender:
    Male
    First Name:
    Steve
    Vehicle:
    '16 Quicksand DCSB TRD OR
    v.1

    v.2

     
    ROCdermody, Oct 7, 2016
    #409
  10. Oct 7, 2016 at 12:49 PM
    #410
    Metalhead514

    #410
    Metalhead514 Darth Taco

    Joined:
    Jun 1, 2016
    Member:
    #188494
    Messages:
    529
    Gender:
    Male
    First Name:
    Nate
    Washington State
    Vehicle:
    '16 TRD Off Road
    MBRP catback, Magnuson TVS 1900 Supercharger, Injen Evolution intake, Race Louvers RST hood vent, Avid front and rear guards and side steps, Cali raised front/ rear LED's, TRD Pro Skid plate, custom aux fuse box, Bak Flip tonneau.
    Damn, that's one hell of an antenna! Here is how I mounted my 4 foot Firefly:

    DSCF3346.jpg
     
    Metalhead514, Oct 7, 2016
    #410
    joepagejr and ExplorHer like this.
  11. Oct 7, 2016 at 1:15 PM
    #411
    foy1der

    #411
    foy1der Well-Known Member

    Joined:
    Sep 18, 2016
    Member:
    #197597
    Messages:
    570
    Gender:
    Male
    First Name:
    W1FOY
    Vehicle:
    2017 OR DCLB
    What about at the ass end?
     
    foy1der, Oct 7, 2016
    #411
  12. Oct 7, 2016 at 2:16 PM
    #412
    ROCdermody

    #412
    ROCdermody Well-Known Member

    Joined:
    Oct 15, 2015
    Member:
    #166740
    Messages:
    1,037
    Gender:
    Male
    First Name:
    Steve
    Vehicle:
    '16 Quicksand DCSB TRD OR



     
    ROCdermody, Oct 7, 2016
    #412
    DonXavi01 and LadyRed like this.
  13. Oct 7, 2016 at 2:39 PM
    #413
    ExplorHer

    #413
    ExplorHer Question Authority

    Joined:
    May 2, 2016
    Member:
    #185889
    Messages:
    822
    Gender:
    Male
    Near Pittsburgh
    Vehicle:
    2016 4cyl, 5MT, 4x4, 2 seats, dents, & rust
    I'm going with a very similar set up, but I was thinking I would have to run a ground wire to the mount. Is that not so?
     
    ExplorHer, Oct 7, 2016
    #413
  14. Oct 7, 2016 at 5:05 PM
    #414
    foy1der

    #414
    foy1der Well-Known Member

    Joined:
    Sep 18, 2016
    Member:
    #197597
    Messages:
    570
    Gender:
    Male
    First Name:
    W1FOY
    Vehicle:
    2017 OR DCLB
    CB should always be grounded. With the composite bed, any connection to a solid ground is questionable. I plan to run a ground wire once @C4 Fabrication gets the 3rd gen mount designed and fabbed.
     
    foy1der, Oct 7, 2016
    #414
  15. Oct 7, 2016 at 5:16 PM
    #415
    EatSleepTacos

    #415
    EatSleepTacos Well-Known Member

    Joined:
    Mar 24, 2015
    Member:
    #151688
    Messages:
    59,835
    Gender:
    Male
    First Name:
    Randy
    West Valley, AZ
    Vehicle:
    2017 4Runner
    I ran an 8 gauge grounding strap directly to the frame which brought the SWR down 0.5. Made a big difference.
     
    EatSleepTacos, Oct 7, 2016
    #415
  16. Oct 7, 2016 at 6:26 PM
    #416
    Toyota Kawasaki

    #416
    Toyota Kawasaki Seasons Beatings

    Joined:
    Dec 1, 2015
    Member:
    #171193
    Messages:
    320
    Gender:
    Male
    509
    Vehicle:
    2016 TRD OR
    Wish I had room to install my old Uniden Grant XL. That radio screams:)

    20161007_181445.jpg
     
    Last edited: Nov 7, 2016
    Toyota Kawasaki, Oct 7, 2016
    #416
  17. Oct 7, 2016 at 9:33 PM
    #417
    LadyRed

    #417
    LadyRed Making all the right wrong turns

    Joined:
    Mar 30, 2016
    Member:
    #182803
    Messages:
    1,692
    Gender:
    Female
    First Name:
    Leah
    Florida/Mississippi
    Vehicle:
    2016 4x4 TRD OR DCSB
    OME Lift Total Chaos UCA SCS Ray 10s
    Which mount is that?
     
    LadyRed, Oct 7, 2016
    #417
  18. Oct 7, 2016 at 9:39 PM
    #418
    2016BBP

    #418
    2016BBP Well-Known Member

    Joined:
    Feb 25, 2016
    Member:
    #179323
    Messages:
    831
    Gender:
    Male
    Southeast
    Vehicle:
    SR5 V6 Auto
    Method Wheels, WxTechGuards, TowPkg, KNDropn, 3M-Tint
    It is the metal mass directly under the antenna, not what's along side, that counts. And a ground strap is not a replacement for proper mounting.

    For those that want to get the most out of their install, here is some very useful info.
    http://www.k0bg.com/bonding.html
     
    2016BBP, Oct 7, 2016
    #418
    MikeyD.25 likes this.
  19. Oct 7, 2016 at 10:26 PM
    #419
    Ducman4x4

    #419
    Ducman4x4 Yusi The Yeti

    Joined:
    Apr 18, 2016
    Member:
    #184636
    Messages:
    444
    Gender:
    Male
    First Name:
    Ducman
    SoCal
    Vehicle:
    Suuuper Duuuper White
    Stuff for Mall Crawling
    Ducman4x4, Oct 7, 2016
    #419
    LadyRed[QUOTED] and ROCdermody like this.
  20. Oct 8, 2016 at 12:28 AM
    #420
    Metalhead514

    #420
    Metalhead514 Darth Taco

    Joined:
    Jun 1, 2016
    Member:
    #188494
    Messages:
    529
    Gender:
    Male
    First Name:
    Nate
    Washington State
    Vehicle:
    '16 TRD Off Road
    MBRP catback, Magnuson TVS 1900 Supercharger, Injen Evolution intake, Race Louvers RST hood vent, Avid front and rear guards and side steps, Cali raised front/ rear LED's, TRD Pro Skid plate, custom aux fuse box, Bak Flip tonneau.
    I didn't. I'm sure the hardware holding the bed rails on to the truck is touching metal somewhere....
     
    Metalhead514, Oct 8, 2016
    #420
Page 21 of 81

Products Discussed in

USA Made PL-259 Improved Double Shielded RG-58u for FireStik Antenna K-8A 18-Foot Single CB/Ham Coax Cable
$42.99
FireStik FL3-B Three Foot FireFly Antenna With Tuneable Tip (Black)
$32.18
Uniden CMX760 Bearcat Off Road Series Compact Mobile CB Radio, 40-Channel Operation, Ultra-Compact for Easy Mounting, Large 7-Color Backlit LCD Display on Mic with Built-in Speaker Mic, Black
$141.12
Wilson 305-830 18-Foot Belden Coax Cable with PL-259/FME Connectors - 18FT
$21.78
K40 K4018FME 18ft Super Mini-8 CB Antenna Cable with Removable FME Connector, Black
$22.49
Firestik K4R HEAVY-DUTY STUD MOUNT with 1.25 in. BOLT
$9.92
SPECO 6" 15 Watt PA Horn SPC-10
$37.54
Horn, Weatherproof, 6in
$27.96
FireStik K4 Antenna Stud Mounts
$10.99
Workman CP4 10" CB Radio Right Angle Microphone Extension Cord
$14.47
Cobra 29LX AM Professional CB Radio - Emergency Radio, Travel Essentials, NOAA Weather Channels and Emergency Alert System, Selectable 4-Color LCD, Auto-Scan and Radio Check, Black
$159.94
Right Angle 4 PIN CB Microphone Plug; 4-Position Adjustable Connector
$10.50
Uniden BEARCAT 980 40- Channel SSB CB Radio with Sideband NOAA WeatherBand,7- Color Digital Display PA/CB Switch and Noise Cancelling Mic, Wireless Mic Compatible
$166.77
FireStik K-4A Stud with Screw-On Coaxial Termination for Antenna Mirror Mounts
$13.20
tram-browning BR-140-B CB Antenna, 26.5MHz–30MHz, NMO Mounting, Black
$42.99
SPECO 10 6" 15 Watt PA Horn (SPC-10)
$39.99
Hustler HQ27 55" Steel Power Packer CB Radio Antenna (White)
$45.64
Uniden PRO520XL Pro Series 40-Channel CB Radio. Compact Design. ANL Switch and PA/CB Switch. 7 Watts of Audio Output and Instant Emergency Channel 9. - Black
$70.48
Uniden BEARCAT 880 CB Radio with 40 Channels and Large Easy-to-Read 7-Color LCD Display with Backlighting, Backlit Control Knobs/Buttons, NOAA Weather Alert, PA/CB Switch, and Wireless Mic Compatible
$140.91
Firestik Nylon Stud Mount Insulators 8 Piece Assortment, NW-1
$5.18
Uniden PRO505XL 40-Channel CB Radio. Pro-Series, Compact Design. Public Address (PA) Function. Instant Emergency Channel 9, External Speaker Jack, Large Easy to Read Display. - Black
$56.68
18' RG-58A/U Coaxial Cable With Pl-259 Connectors
$11.08
Pyle Indoor/Outdoor PA Horn Speaker - 8” Portable PA Speaker with 8 Ohms Impedance & 65 Watts Peak Power - Mounting Bracket & Hardware Included PHSP5, White
$23.69
FireStik CB Radio Antenna 4ft Orig 5-8 Wave 400W - KW-4BK - Black
$32.00
FireStik SS-204A Adjustable Stainless Steel Vertical Door jamb Mount
$23.44
Gear Keeper CB MIC KEEPER Retractable Microphone Holder RT4-4112 – Features Heavy-Duty Snap Clip Mount, Adjustable Mic Lanyard and Hardware Mounting Kit - Made in USA – Black
$21.99
Hustler QD-2 Antenna Quick Disconnect - Stainless Steel!
$47.50
Uniden (BC15) Bearcat 15-Watt External Communications Speaker. Durable Rugged Design, Perfect for Amplifying Uniden Scanners, CB Radios, and Other Communications Receivers, Black
$30.99
Pyle Portable PA Speaker - All-Weather Mono Trumpet Horn Speaker, 5” Outdoor PA System with 25W Peak Power, 8 Ohms Impedance, 180° Adjustable Swiveling Bracket for Easy Maneuverability
$20.99
Uniden Bearcat BC75XLT Handheld Scanner, 300 Channels, 10 banks, Close Call Technology, PC Programable, NOAA Weather, Aviation, Marine, Railroad, NASCAR, and Non-Digital Police/Fire/Public Safety
$99.99
RoadPro RP-8X18 Gray 18 Foot CB Antenna Coax Cable with PL-259 Connectors
$12.63
Midland 75-822 Handheld CB Radio & Mobile CB Radio – Walkie Talkie with 40 Channels, NOAA Weather Alerts, Long Range, Compatible with CB Antennas
$99.99
FIRESTIK Firestik Door/Hatch Edge Swivel Mount w/K-4 Stud, SS-204
$22.93
FIRESTIK Side Mount with 4KA Stud, K24
$23.99
Astatic PDC1 100 Watt SWR Meter
$23.99
Astatic 302-VS4 External 5 Watt CB Speaker with 8 Ohms Impedance
$12.99
Francis 300-CB240 Orange 4 Foot Hot Rod CB Antenna Whip AM|FM Ready
$28.60
Uniden PRO510XL Pro Series 40-Channel CB Radio. Compact Design. Backlit LCD Display. Public Address. ANL Switch and 7 Watts of Audio Output. Unique PLL Circuit. S/RF LED Meter. , Black
$56.37
To Top