What have you done to your Tacoma today? 1st Gen Edition

[i found some, but theyre all made and sold by one guy who only has an 88 percent approval rate, which is low for how high his rep score was. plus he has a strict no return policy

 

i believe relentless and cbi have lightbar mounts, i'd check them out before ebay

 

There is alot of things that could contribute. You may want to consider replacing the front o2 sensor.

If you had a ultraguage you could diagnose it much better. You could look at the o2 sensor reading and your fuel trims.

 

Zinc plating first part

Lower left "before"

 

Go for the relentless fab ones. Have 2 styles to choose from too

 

im looking at their products but i am so confused. i already have the light bar and roof mount brackets. do they sell just the door mount brackets?

 

the roof mount brackets are the ones that tuck into the door gap.

 

the ones that came with this light are for the roof. drilling into my roof. which is obviously a big negative.

 

those are just the universal mounts that come with led bars.

 

yea those are shit.

Get the relentless ones. They use screws that go into the door area. Still have to drill holes no matter what.

If you don't wanna drill holes, gonna have to sell the light bar.

 

Go ask him. I don't own them haha

And by rocks i mean shit like Shoshone.

 

no im fine with drilling in the door jamb. i have a 91 jeep with a light bar thats drilled and it is fine cause its rusty and older, but my truck is a different story. i have a major fear of water damage. at least in the door it will have a little more protection and i feel like i can insulate it better.

 

For the relentless mounts the holes go behind the rubber seal for the door so not even noticeable an small. I have the lo pro mounts and was honestly the only design I liked for a roof bar

 

The relentless ones drill into the door jam. Add some slicone to the screws when you screw them in for extra water safety.

 

You can also silicone on the mount when screwing it in to make sure it's 100% water tight and if you ever remove them just squirt some silicone in the holes and cover with the door seal, you'll never know

Edit: @Blackdawg you beat me too it

 

lo pro, got it
did you buy them off of the relentless site and if so how long ago?

definitely adding silicone.

agreed. but i didnt see where relentless sold just the brackets. still looking

 

my jeep buddies have great luck with them wear wise and its nothing but rock here.

 

http://www.relentlessfabrication.co...-tacoma-led-bar-lo-pro-roof-mounting-brackets

 

how did you find it? i am on their page right now searching

 

its the very first item listed for 1st gens