MARYLAND TACOMAS

Appreciate it. We're looking to buy a house in April too. Figured I'd add some wedding planning to the house hunt stress

 

Phew, that'll do it!

 

Sounds like what I did. Engaged in March and we just bought a house a month ago. Just locked down our venue. Have fun!

 

Work in MD, live in WV, live like a Incestual King

 

@colinb17 @Mobtown Offroad @AR15xAR10 and someone that had the same situation, why my truck tires look like that \\ // ? Do I need realigment or aftermarket UCAs?

 

That was @ST3VE aka King of camber. Alignment should fix it unless the alignment shop can't get enough adjustment, then UCA'so would be required

 

Alignment. All we had to do was adjust my toe to get that right.

You'll need UCAs to clear the coils at droop, if you have that issue

 

tires are like that because the alignment is off. weather or not UCAs are needed or not is hard to determine through cyberspace. take a picture of the cam bolts to start, and at least then we can determine if you have any adjustment left.

 

Got some stock skids for sale if anyone is interested. I'll paint the ones with surface rust for anyone in this thread. LMK. https://www.tacomaworld.com/threads/trd-or-stock-skids.455192/

 

Also, anyone going to Rausch this weekend? We're heading up Saturday morning - probably just running easy stuff bc my buddy is in a stock grand cherokee.

 

Mine were almost as bad and i ended up scrapping them, couldn't give them away

 

Same, I couldn't give them away so I ended up hanging them at the range.

 

I feel like someone will at least want the TRD aluminum one.

 

I think i got $3 in scrap for them. wouldnt give me clean aluminum value for the trd skid plate because it was bent and (factory) powdercoated

 

Here:
Front and rear of LCA driver side

 

the good news is that you have a good bit of adjustment left. bad news....no way to tell if it is enough to correct your camber.

 

Thanks

 

Man I want a TRD one....but not $100 lol

 

I want to go soon. But I work this weekend