Finally!! DCSB

Appointment for my KO2's is made. Oddly I have a Pyrite Mica, TRD beadlocks with black ring, similar lift and shell. This is why I was so interested in knowing the spacer size. Was basically looking at my truck set up like that. Ha!

 

Nice, I love the setup and the look..
I rescently had to have Les Schwab balance my tires because Discount Tire couldn't do it. Took Les Schwab one try to get it way better than Discount could ever get it.
updated pic....

 

Looks awesome! Really will be so close to what my truck looks like except I'm a 05-11 body. The above pictures are with the spacers installed?

 

Got the 295's on and I'm rubbing pretty good on the All-pro UCA's. I'll have to get some spacers. The question is .75 or 1 inch...not that there is much of a difference.

 

Yeah those pics are with the spacers installed. I rubbed my JBA UCA's with 3/4" spacers so I got 1" now and no more rubbing.
so I have 3/4" in the rear and 1" in the front

 

Any reason to not do 1 inch in the rear too? Do you by chance have pictures straight on from front and rear to see how much it sticks out?

 

I didn't want the rear to stickout any farther. its perfect with the 3/4"... Actually with my setup the tires stickout about the same now. plus I didn't want to spend another $100 on spacers when I didn't need to

 

How did your tires balance out?

 

So far so good.

Do you have straight on photos?

 

that's good, No I don't have any photos yet of straight on from front or rear

 

Well I'd love to see some if you have the time to take some. I'm debating between 1 and 1.25 spacers to ensure clearance. Would an additional .25 really be noticeable?

 

yup it would. I will get some pics later from front and rear.

 

Any luck on this?

 

Congrats! I just got a 2015 dcsb 4x4 trd or in silver, but I almost got one the same color as your. I do love that color. Looks great!

 

Just a little update on the Tacoma build.. I think I finally got rid of my stupid Dakar leaf spring squeak. time will tell. I swapped out the front bushings with Poly Bushings from Wheelers. I'm pretty sure this has been the problem from the start. Ive tried all the other typre of fixes. and nothing worked. Plus the stock bushings they put in the Dakars aren't "pressed" in they are just pounded in, and they were dry with no grease on them.
I also got rid of my tailpipe routed above the leaf spring. The Dakars would hit it if I stuff my tire. So Now its just dumped..
It sounds a lot better to this way.

 

Test fitting New wheels (17" Method NV) with 3/4" Bora spacers. Just incase my new 34x11.5 Ridge grapplers hit my JBA UCA's at full lock.. Going to run these without the center caps, don't like the ones it comes with..
Cant wait to get rid of these KO2's!!!

 

My New addition to the shop.. "Tacoma" toolbox.

 

Any pics of them installed?

 

I'll get pics up later today.