What is biggest tire that you can put on a 2017 TRD Pro

I will be doing a lot offroading I live 2.5 mile from the pavement on a gravel road.I will be hunting coyotes in the truck and do it about every chance I get it what I do.I have a set of KO2S on my other truck a ram 1500 and found the to be great for my terrain especially in snow cover.Just looking for the biggest tire with out changing it up much.

 

1 inch lift over other 3rd gen.
2 inch compared to 2nd gen I believe.

 

depending on tread 265 70 17 is close pretty much a 32inch tire which will give you a little more clearance over factory.
Otherwise maybe a 255/80 if you really want a 33.

 

265 75 16. Looks and works great on and off-road. Wanted to go bigger but didn't want to cut up things and like the room to flex! KO2

 

How bout 900/465/47. Let us know how that works out, BRO!!!

G.

 

Because they're not original?

 

Oh no here we go again.

 

Anyone try a 255/85r16 on stock pro wheels yet? I'm thinking you can drive it on the road without the mudflaps, but any moderate suspension cycling will require a liner remold and probably a mount chop.

 

Sorry to revive an old thread. Any more tire sizes TRD Pro owners experiment with and would like to share with the rest of us? This thread actually has the chance to getting back to being helpful again.

 

Do you have any kind of lift on this? Nice looking BTW.

 

i just purchased a set of the pro sema 17 in rims in grey,, im going to put some 275/70/17's on the rims and then put them on my Pro, im thinking they should be a good size with no rubbing...just alittle under a 33 in tire,,

 

285/70/17 on 4runner Pro rims

Minor rubbing on trim, a little dremel work clears that up.

 

255/85/16 on stock pro rims. Just got them but will have to do some trimming on plastic where mud flaps mount. Haven't had time to off-road it but two weeks of driving it it around town and no rubbing even while turning steering wheel all the way. Toyo mts so their the tallest of the 255'S.

 

im going with a c-load tire,, 275/70/17 for a summer tire setup... cooper at3's........

 

285/70/17.. Had to trim behind the front wheels. I used a heat gun to remold the front of the fender liners.

 

What wheels are those, looks good.

 

Have to meme it @Unchained 5150

 

how much trimming ???,, i just got a set of those rims also, but the grey version,,, some guys said i would have to do the cab mount chop ? how much and where did you have to trim,, thanks..

 

Just some minor plastic on the edges of the wheel wells. Put em on, run a few days and you'll see it.

 

Exactly what I did and couldn't be happier (rolls better than 70, less bumpy feeling, 1" height increase) . No loss in mpg too, went with Toyo AT2 C rated instead of heavier KO2s...