want to put 30 or 31s on my truck and a 2 inch lift but its a 2wd is this a bad idea?

@mathematical The only pictures I have of my old truck are on Photobucket, its down for maintenance. Ill post some pics when they are up and running again.

http://4x4.fatbobsgarage.com/tacoma-5-lug-c13366all.aspx

This is where I would look for 5 lug parts. They seem to be about the best out there for 5 lugs, which isn't saying much.

 

Any glass for first gen tacoma will fit. You might have to do some sanding or washer stacking though because no glass fits perfectly. Figure out where your rubbing first. Then you can figure out how to handle it.

 

Thanks for the link. Besides replacing shocks, which I don't need yet, the only thing I don't have is the front spacer. So far I have:

1. 3.5" Doestch Spindles
2. Rear add-a-leaf
3. 2" Rear Shackles (not installed)

I guess I'm sticking with what I've got unless I end up doing the coil spacer, which is usually touted as "not that good" by people on here, yourself included. Thanks for the tip on the glass. I'm going to first remove the wheel-well plastics and see how things go with rubbing. If I'm still having issues, I'll look into fender cutting or getting glass.

Thanks!

 

http://www.fabtechmotorsports.com/TOYOTA-2WD/TACOMA-5-LUG-1995-5-04/3-quot-SYSTEMS-c1365/

http://www.rockymountainsusp.com/k7014-ft.html

If the tires aren't rubbing the fenders then glass won't do you any good. Gotta find out what it is actually rubbing on. If you hit a big bump the way your fenders are currently though it looks like you might smash one. Depends on how much uptravel you have.

http://www.autopartswarehouse.com/search/?searchType=global&N=0&Ntt=1998+Toyota+Tacoma+Coil+Springs

Look here for springs, I'm not sure exactly which ones you would need. I would call and ask.

http://www.airbagit.com/aboutus.asp

These guys might be good to talk to as well. Better yet they are not too far from you, might be worth a drive up to phx.

Are you looking for a stock bumper?