Norcal Spotted and BS Thread

Got yah. You rea

I used:

Angle die grinder
BFH
Cold chisel
Flat disk
Flap wheel for cleanup
Black paint for ground down areas

So not to much for the install. It's a bitch popping the rivets. I would plan on a hour per rivet.

 

yup, not a fun job. as stated above

grinder and some heavy duty flap disks, some good punches, a set of top quality HSS drill bits and a step bit, BFH, vice grips, a couple valium and lots of patience

i'll come down and help, so long as you don't plan on starting at the crack of dawn again

 

We'll work to your schedule this time. Appreciate it.

 

I see the same project in my near future

 

Thanks Sleeping Beauty.

 

.

 

@tyfoon11
They were all out of patience.

 

Holy crap it's gonna cost you more to get the old brackets off then the actual hydros.

 

Clearly no fucks remain.

 

Nice

 

This shit is happening.

 

I read this like John C Reilly was intently exclaiming this to me.

 

Has anybody used an air hammer to punch the rivets out?

Like grind the nubs off flat, then use the air hammer to push them out?

 

I used 2 bald dudes.

@Gply @tyfoon11

 

I nominate this post for the Dennis Miller obscure reference award for 2016.

 

I only have one of those.

 

Look at another way...he has all the stuff to help someone else now.

 

My Xmas pressies?