"Wheeler's Anonymous"

Somethings you just can't explain

 

You should frame it

 

Eventually. I haven't gotten around to finding time to buy a frame. I'll gladly accept any frame donations, I believe it's a 6x8

 

These are some of the reasons that we do not have skids available yet:
There are a bunch of companies making skids and in my opinion they are all fairly identical. We would like to come up with a design that stands out from the others and has some features that no other skids have to offer.
The oil filter access panel seems to be a big selling point for most people, but I agree with the fact that it will be rendered useless after the first time it takes a solid hit. So we are trying to figure out a way to properly tackle that issue.
Basically what it comes down to is that we have not had nearly enough time to get a Tacoma in the shop and design some skids that are different/better than the ones already available. We will have them someday, but do not have any timeframe at all for when that might be.

 

Wish you guys were in California, I'd gladly donate my truck for R&D to you guys. I should be putting my sliders to the test this weekend, provided weather doesn't close down trails

 

A little late to the party but... aha hahah!

 

First one on...1st gen ball joints are a much bigger pain in the ass to remove than the 3rd gens lol

 

If you don’t have a puller and don’t plan to re-use them some people just cut them off and its easier to hit out with a hammer..

Anyways, looks good!

 

When I had 5100s I just let pep boys deal with that SKETCHYNESS

 

But that's perfectly good monies you gave to some dbag like me to install them lol
It's not that bad, but it makes you question whether or not the guy that made the tool you're using was on his game that day

 

@Dangerousd1987 used those doohickeys for his coils. I'm an L-7 weenie and won't go near them.

 

Haha, I’ve seen those coil compressors and opt out every time... never have to deal with those again because coilovers

 

Haha yeah I feel bad actually, Jason was fighting it for awhile cause he didn't know my new arms came with new ball joints. They were much easier to bash off lol

 

Always check the box and parts first

 

Just got home, new UCAs feel and ride great, thanks @glorifiedwelder!!

He adjusted my 5100s the .85 setting and my truck looks more level now, ride still feels great. Don't feel any added stiffness. Just gotta get an alignment done tomorrow morning and I'm all set

 

Suuuuuuuper sketchy

 

if the compressor is on the spring square it can't come off. did my 5100s on the taco, tundra, and even my camry when I swapped struts . ...guess it's the idea behind it? I'm more afraid of air hoses popping off the fittings...that shit is terrifying lol

 

Hey @oni06 your supercharger ship out yet?? Excited to see it in person hopefully on a run here in the near future