DFW BS Thread : ********NEW MEET!! CHECK POST #1*******

Pecan Lodge

 

Just let me know, and ill add it to the list.

 

Sure. But I'm far north. North of Frisco. Mostnwont want to drive this far

 

Added

 

VOTED! im down for some good ol bbq and make new friends

 

I voted but I dont know if I can go anywhere

 

Ya I'm off lake Tawakoni

 

I'll try and make it out to the meet up if I'm in town. I'm leaving on the 6th for Big Bend and was planning on making the drive out to PINS for the last few days. I was planning on getting back to DFW late on the 12th but if I cut PINS short I'll be able to go to the meet up. If i can make it, location doesn't make a difference to me.

 

Which one of you was just poking around my truck at home depot?

 

So I drilled a hole into my lug nut. I should have prefaced all this by saying I have the acorn gorilla locks. They are the 2 piece locks where the top part just spins. So I drilled through the small top layer, but the layer was so thin you can't use the extractor. So basically, it's just the inside threads now. Not sure what to do now.

 

Find an independent tire shop or mechanic that will have the knowledge and care to help you but won't have corporate policies preventing them from doing shady things

 

A dealer should be able to remove it, ive seen quotes for 75 all the way up to 200 for the service however as it sometimes requires a new stud.

 

Studs cost about $1.50

 

If only the labor was just as cheap

 

Your labor is cheap, its the tools that get pricey

 

I'm looking at my options for rock sliders. I can get a set of weld on's with DOM tubing from 4xinnovations.com shipped to me for right around $350, then I just have to paint and find someone to weld them to my frame. Is there a local shop/fabricator I can go to that would make/install for about the same price? I'm all about supporting local business and will pay for a quality product/work, but don't want to overspend unnecessarily.
http://www.4xinnovations.com/2005--...coma-Rock-Slider_p_74.html?lt_c=1&quickcart=1

 

10anny Cobra wheels, billet cap and looks like clear markers? Grosssssss!

 

Where is your mustang?

 

Well out of the 25 or so I've owned, another one will hopefully soon replace my recently departed SRT Challenger. But it won't be no 99+ 4.6 that's for sure. Fox body or nobody