Long Travel BS Thread

Dafuq did you buy?

If a common hub could buy new and sell for minimal money. Or fill and re drill the holes smaller.

MY D44 FF is getting the boot for Toyota based parts with a parking brake!

 

Rear axle is a ruffstuff ford 9" fullfloat with 35 spline shafts and Dana 60 hubs with a 6 on 5.5 bolt pattern to keep the same wheels I have all the way around. I have some other front hubs layin around(oem Toyota) that I'll bore the holes out on to fit bigger studs.

I don't need the abs tone rings or any of that shit, my speedo works off the transfer case and I'm deleting the whole abs system because it's messed up and keeps pissing the rest of my truck off, I'd unplug it and it's awesome until I need the brakes because the dumb trd models are electric hydro boosted not vacuum like the base models( which I'm converting it to) manual transmission trucks FTW!!

 

Knock the oem studs out and see if there is enough meet to drill out. you will need the $8 solo lug nuts or machine pockets around the lug holes to accept 1 1/8 socket.

 

Shoot I need to stop browsing this... really making me want to LT my truck at the same time so much regret for buying new UCA's, leafs, and King OEM replacements.

 

I'm a bit slower than a few of our backyard guys on here, but I'll be done in a week or 2.

 

Looks awesome. Smart going over the "hump" mine goes through and makes getting the tranny out a complete bitch.

 

Thanks captain obvious

 

It was a bit of a pain going over, but I did it just for the reason in case I put a larger transmission in down the road.

 

King stepping their game up big time this year. Spy shots from SEMA for you guys.

 

dayum

 

Anyone have a line on some king or fox bump stops? Building my engine cage and would like to bump off the top of the spindle to help keep the lbj together...

Used is always preferred...!

 

both in stock, but they're new...

 

def go through @tubbsisland i ordered my bumps and cans from him shipping was super fast, ill def me ordering more through him soon

 

You can fit a 3.0 in the Tacoma stock coil buckets?

 

Can't do that with factory spindle bruh

 

Is that a MT or LT shock? Curious also how that thing is suppose to stuff in there. Looks bolt on.

 

Those are oem replacements

 

OEM Replacement for use with a stock width UCA

 

DAMMMNNN Good for king. That shit won't fade.