What Have You Done To Your 2nd Gen Tacoma Today?

Was in the back yard last night...Thinking we can fit a minimum of 10 Tacomas back there!!!

 

I was the same. Had them for 8 months. And my buddy put them on for me 2 months ago lol. But do it. It's way better when they are on

 

I built a frame for my bed drawers!

 

put on some vent visors today, peeled all the emblems the other day and putting a little 2" block lift and some wheel spacers on next week

 

Been thinking about doing this for a while now. What size did you have to drill for the plug to fit through?

 

Super sexy! what material is that?

 

you running spacers??

 

Friendly warning on those in Chanel vent visors. If you have non factory window tint. This makes the Chanel to tight to the point where it starts to crinkle the tint at the top. This goes for the auto ventshade visors. Idk about the weather tech. I'm sure those are better . Just beware

 

Nope.

I hate spacers.

I am running a 17x8 6x139 0mm offset wheel. And an 265/70r17 tire

 

Yeah just the factory tint on the rear windows, unfortunately here in RI all tint is illegal for now at least

 

gotcha. compared to mine it looks like your stance is better and i have the same specs.

 

You should be completely fine with factory tint. I love my visors but they ruined 2 sets of Window tint. Only in the front tho. Good thing my tint guy has a lifetime warranty. And still replaced the tint for me even tho it's not his fault

 

Probably the aggressive shoulder on this tire.

Cooper Discover ST Maxx.

 

yeah i love the weathertech visors, I get them threw work so make out pretty well on them too

 

I just pulled the trigger on a new set of SCS SR8 wheels in matte bronze

 

I think my hole saw is a 2 1/4", I just read that a 2 1/8" might work too. Either way the factory plug (if you still have it) only mounts on one side and I found it a little flimsy so I went to the hardware store bought a rubber coupler from the plumbing department that fit on the back of it, cut the length and attached the coupler with a hose clamp. Nice and tight! It's been like that for almost 5 years now.

 

Now I just have to decide on tires. I've been looking at the Nitto Rodge Line. Probably do 265/70/17's

 

This is Extruded Aluminum. Can be ordered in all different kinds of shapes and sizes.

 

I bet my Husky Liners would stay in place pretty well without the clips... maybe try them, or some comparable floor liner that's got nowhere else to go?