CB specifics

@ C4 Fab

+1 on a stainless steel option.

I bought a hood mount bracket and decided not to use it because of the probability of corrosion. Due to needing a good ground and not wanting the corrosion concern for a CB antenna, I ordered a stainless flat bar to make it myself.

If you guys made the bracket in stainless I would get one for the left and right side for antenna mounts.

 

+ another one on the stainless. They way too much salt here. I'd go with the CB on the right and the vhf/uhf on the left.

 

Stainless for me too! The bottle opener will be better without a finish to chip off.

 

Yep! Only other thing you'd really need is misc. wiring and connectors to connect the radio to the battery.

Also it's very easy to do.

 

Thanks! so you recommend going to the battery? What about one of those cigarette adapter power supply?

EDIT: I want to try avoiding drilling any holes... I plan on putting the radio in the little open space where that random little light shines into.

 

Not true, throw that Firestick bracket in the trash and buy one from @C4Fabrication

 

You can try going through the cigarette lighter! The reason I recommend the battery is you get the cleanest signal that way. You may get interference otherwise. You could always go to the cigarette lighter and if it's no good, then go to the battery.

 

Alright cool. Thanks!

 

Ok everyone, we are hoping to have our CB/HAM brackets available on the website by the end of the day today. Also, we discovered another great use for the brackets as well!

 

Perfect I was ordering my radio gear today! Hopefully the price is right and I'll be grabbing one with the bottle opener today!

 

I know that I am in the 3rd gen forum but....will this fit on a 2nd gen? Thanks.

 

price will be set at 35.00 per bracket.

 

No this bracket will not fit the 2nd gen. We hope to have a 2nd gen version available soon.

 

NOOOooooooooo!!!!!
Shit!

soon?

 

If you don't want to wait, BAMF makes one.

 

The Brackets are now live on the website!!
driver side: http://www.c4fabrication.com/produc...m-antenna-brackets-rear-led-light-pod-mounts/
passenger side: http://www.c4fabrication.com/produc...m-antenna-brackets-rear-led-light-pod-mounts/

We do not have any pictures of the passenger side yet, so don't be confused on the website when you see pics of the driver side bracket when you visit the passenger side link. We will have pics of the passenger side on the site soon.

 

Ordered! Thank you so much .

 

Awesome, thank you!

 

What is this?

 

Ordered! Thanks again!!