What Have You Done To Your 3rd Gen Today?

If I were you I would wait a week or two to see if the front settles any. A lot of guys on here are running your lift setup and don't do any lift to rear!

 

Although, now that I think about it, maybe I didn't answer the question at hand. There is no alignment adjustment in the rear... but could the front need to berealigned after lifting the rear? I would doubt it, but I'm not 100% sure...

I've got some spare 1.5" aluminum blocks that you're welcome to have, just pay shipping. You'd need longer u bolts. But disclaimer: I replaced them because I was getting a driveline vibration when braking from 30 MPH down. Installing tapered blocks fixed the issue. You could maybe use the blocks and some tapered shims.

 

Ok, thanks for that. I'll hold off a while and see how things settle up front. It's just slightly higher up there, so if I can get a little bit of settle, I'll be happy as is.

 

What brand of blocks did you use that were tapered?

 

Nice work! So, do the cloth covers come off first? Or do these just slip over?

 

Loaded up the trailer and delivered 2 cords of wood. Pulls really nice with the lift. Two trips obviously considering 1 cord and the trailer weigh in around 5700 pounds

 

Just some solid steel cast ones from eBay.

http://www.ebay.com/itm/1995-2015-T...ash=item25b1063cca:g:V6UAAOSw4f5YCVue&vxp=mtr

 

Check out the thread "Lifted ' 16 Tacomas" on this forum. Also here is mine I am running stock OR coils 5100s set .85 with 1/4" lift spacer pass side and 1/2 " lift spacer dr side 5100s rear but no lift. I got 1 1/2" extra front lift.

 

Brushgaurds are hit and miss for some people but I find most folks that see the truck with the bedliner on it say it looks good. I like it for two reasons xtra front end protection asd the other is as you see I love lights og all kinds. I think its because of the BOOGY MAN.

 

Very nice!

 

Waxed it again. Installed Tacoma tailgate decal and put my bottle opener in the box. Loving this new PRO!

 

That trucks sick . Nothing like white with black wheels. Goodluck with it. You through out the pro wheels already .

 

Very nicely done. Thanks for all the info

 

looks awesome! pics of the bottle opener? I'm considering doing this... but cant justify drilling into the bed of my brand new truck haha

 

Thanks. I traded my 2010 and swapped wheels and tires.

 

Thank you. I will take one in the am. Not big deal. Two small screws hold it in place. But I hear ya drilling it makes ya cringe a little lol.

 

Changed interior lights to LED. Made a video on how to change out the Vanity lights. I should of used my gopro.
<iframe width="560" height="315" src="https://www.youtube.com/embed/ewdEFlFnoBg" frameborder="0" allowfullscreen></iframe>

 

I want to see this too. Many times I've needed a bottle opener in various scenarios. Debating screws or pop rivets.

 

Here's my install of a bedside bottle opener; easy win

https://www.tacomaworld.com/threads...-3rd-gen-today.399305/page-1093#post-12565183