What Have You Done To Your 2nd Gen Tacoma Today?

True true, BUT ever been out to King of the Hammers in Johnson Valley? Freezing! I plan to do a couple trips up to Tahoe too. Kind of wish i had gone with a bed rack and a RTT, but thats what TW does is sometimes give you buyers remorse! So i work with what i got!

 

Changed my plugs from iridium back to OEM Denso. Then re-torqued the leaf spring u-bolts.

 

I'm tempted to buy this, take off the lifegaurd stuff and paint it white for an ornament on the Christmas tree. Does anyone have a Tacoma ornament for their tree?

Tacoma Truck

 

Got my KO2s road forced after 20k. They were giving me vibes over 55, but seem good again. finally installed the taco lean spacer I left out when I lifted it. Nice to see both sides sitting at 23"s.

 

Installed my not so finished Ipad mini dash today. I say not so finished because it looks like I put the San Andreas Fault in my dash . Plan on re doing it with a suggested primer/paint combo from another member. Heres the link to my build.
https://www.tacomaworld.com/threads/2nd-gen-ipad-mini-dash.459246/

 

Nice looks good fab wise.

 

Bussman build, seat heaters, heated mirrors and CB all wired in and cleaned up.

 

New 255 75R 17 for winter. Cooper AT3's

 

just did the same exact thing

 

Nice looking truck!! I don't know if u meant to put the "front plate" of your #prinsudesign roof rack like that, but to me the front plate is upside down. Just saying.... I got one also, and according to the instructions, the oval cutting face down

 

Leer Topper

 

Did you wire those into the dome???

 

Got my sound system wired up, and lights wired up. Hood Scoop light bar from C4Fab and no drill light bar mounts. Also got my Raptor lights installed!
Pic of the lights with no headlights.

 

Thats why ill get a matte black hood vinyling

 

Yes I want one as well, who makes those? Like this

 

Rolled over 90k yesterday and I realigned my retrofits. I love the light output of them.

Today, I did a full detail on it. Probably the last good coat of wax before the snow starts flying. I still need to do the interior windows, under the hood, and the bed/bad mat still tomorrow.

 

Welded plates to my cab mount chop. Scrubbed rust off my frame. Painted welded plate, frame and rear axle/diff with POR 15.

 

Did a little trout fishing the other day and customized my shifter today. I think it turned out pretty good.

 

Yes I ran the wires up the driver side A-Pillar and under the headliner to the dome light for a trigger and a power. I did this at the same time as the A-Pillar Ram Mount mod and running a Lightning cable from the back of my Pioneer Head Unit over to the Ram Mount behind the dash and the A-Pillar trim.

 

Rolled 20k this evening... And even turned down a side street to stop for the picture haha!