Norcal Spotted and BS Thread

Its a 3rd gen, so I would go with 1 or C (1,2,C???????).

 

2nd gen 2012.. and yes. 1,2,C haha

 

most of my edumacation i got learned from the Army (insert window licking emoji) lol

 

I think 2
you order
we install.....on our trucks

 

i honestly was thinking someone was going to say this... lol

 

You got it.

 

Well I now own a Tepui Autana Sky thanks to @bayareataco Thanks again Jimmy, worked out that it was exactly what I was looking for.

 

1,2,C made me assume you were a 3rd gen

 

You're welcome James! Enjoy

 

Did I hear passes!

Would love to take my daughter out there one of these days.

Cheers

 

I discussed the -121-Dakars (extended, plus "Dakar mods" with Micah in PMs, and frankly, they still leave a good 2 inches on down travel on the table. I'll be calling Micah soon to put in a custom order that has more travel but doesn't require 12 inch + relocates.

 

#norkalkandistore

 

Yup we are members so we have two guest passes you're welcome to borrow. Just let me know when you're going and you can swing by and pick them up. I'm right in Aptos so on the way.

 

Does your A pillar mount sit flat?

 

Right now I'm more concerned with ride quality than travel. My stock leafs are pretty much shot to shit.

What did they recommend for a leaf pack to optimize the shocks? Did he have any suggestions?

 

It does.

But I kinda made it easier for it when I was tapping my pilot for the three holes. You put in plastic molly fastener things, and I put a ish ton of silicon in/around/on before i screwed it on. I have read that people use double sided tape for the bracket and I can see why it works, the fender mounts are solid. But since I like to run into every tree in the forest, I made sure to mount mine properly.

 

I went the double stick route and mine pealed up. From the looks of it it's because it's not sitting perfectly flat. I don't know if I need to make the holes bigger and move it back or if it's just off.

I took forever lining up the template and measuring like a million times.

 

Oh then the molly's would have made that not a issue, it is flat enough. Once I had my fender holes and put the studs in, was super easy to line the A pillar with some tape on it and a sharpie. I just outlined the plate that I installed first.