AZ BS Thread 4²0

#you're

Just sayin

 

Punctuation doesn't work within a hashtag, #justsayin

 

I have been out millennial'd

 

LOL, I was a mod on a different website when using hashtags within a post just barley became a thing, WAY back before IG and whatnot, that's how I know.

 

Good cover story

Your time as a mod on a bronies site is safe with me

 

Riddle me this AZTW.

Just got the rotors and pads replaced.
New tires (balanced too)
Rims are bent
Alignment done less than 10k ago
Rear ubolts torqued to spec and checked

Didn't do the drums due to time, but they do squeak

Still got a weird shimmy shake when braking at highway speeds or breaking into turns. Wheel shakes, cabs vibrates, brake pedal gives a little.

I fear bearings being a possible issue or maybe my spacers lift is starting to show it's true colors after 50k miles. Had the same issue before new brakes, before my alignment, and before new tires.

 

Ha the wife wants the new Jeep Grand Cherokee

 

Get the SRT, no problem

 

That was the only model I gave her to choose from.

 

Yep, bamf makes a crossmember, you can fab your own, and I forget the other company. @a.smo can chime in..

Hardest part is honestly making sure the bumpstop is set right so that your bump is stopping the back instead of the shock itself compressing all the way.

I'm running 10s but I think the shockbody is kinda long and I don't have much uptravel before I'm bumped. On the other hand, if I set it for more up travel my rear fenders would get crushed and bent by the tire...

Mad down travel though... an I'm not hitting whoops or jumping so works out good for me

 

I am trying not to add that much cost. And work with what I have. That would be bad ass though

 

Your not helping but make my wife really not happy with pocket book I think I am going to mount a cross member and mount them that way.

 

Do I have to mount them that way if I put a cross member in.

 

What length are the oem ones you have now?

If you throw the crossmember in frame to frame and not have the lower tabs too far down your axle they would probably work... just make sure to cycle and measure

 

They are 10s

 

Are you sure?

Doesn’t seem right as im running 10s like this / \

Edit: Maybe the compression clickers make the shock body longer than the non clickers....

 

I don't know. I went and measured them today

 

Why are we not having a party at your house?

 

So I have 2 dog crates from Petsmart. 1 small and 1 large. Free to the AZTW peeps. Just have to pick one up if you need.