*Closed* 20% Off Supercharger Group Buy 2nd Gen 4.0 Engine

^^^

I just got really nervous. My plan was to install it with the URD CAI AND I have a winch...

Not sure what to do right now...

 

If you have a pelfreybilt front bumper your pump needs to be relocated. This where I mounted mine.

 

I found this awhile back don't know if it helps but

 

I have the URD TCAI and I was wondering how much modification to the rear of the grill piece this will take also

 

Not sure about you, I was poking my head around, I THINK I will be able to install the pump onto my steel bumper

 

Agree 100%

Also remove the hood latch so that bitch isn't poking you in the belly the whole time!

 

I don't think the battery charger is working. Left it on over night and the BD tuner still states my battery is at 11.9 Volts. I've tested the battery myself and its reading 12.14. Maybe try a different charger. The BD tuner won't let you proceed if the voltage is under 12.1. Suggestions?

 

What charger do you have?

 

Some cheap Walmart one. Going to return it and just buy a nicer one. Then return that one when I'm done. I will look for something above 10amp.

 

Mine is putting out a steady 13v.

 

Good to know. The charger you have is the one I'm hoping to find. We'll see what I come up with. Thanks!

 

I don't know where it is sold locally. I got mine from Amazon.

 

To any of you who are finished with your install and are using the 2.85 pulley Bully Dog tune. On your Bully Dog in the settings screen, what does yours say for the "Current T.V and File T.V?

Mine says "T006 A"

I just want to make sure I have the right tune before I go ripping down the road!

 

This is exactly what I was running into. I kept reformatting cards and pulling down the file from BD. Same error over and over. Finally I actually looked at the card, and whoever zipped up this tune fat fingered the file GTUMENU.GTG. On my SD card, it was labeled as "GTUMMENU.GTG". Well no wonder it couldn't find the file
I selected 2010-2014 Manual Tacoma SC and it uploaded some files. Took about 15 seconds I suppose, not long at all. Is that all I need to do?

 

Here's my proposed setup for the fuel filter. Tank is to the left, engine to the right. That's a lot of Russell fittings.

 

Yep I think you now need to go to the truck and select install download.

 

Sorry thats what I was referring to, I was at the truck at that point. I was surprised at how quick the files loaded. I was thinking it would take quite a while. I just wanted to make sure the tune loaded. Wonder if there is a way to double check now that it's been transferred.