The mod you wish you did sooner

Dash cam.

 

New headlights with the Mini H1 retrofit.

 

Probably bed matt. So simple yet didn't really think about it 'till my plastic liner started getting scuffed up. Other than that probably 33's & wheels, just got them done last weekend...drove 46k miles too many without it.

 

retro hid headlights

 

THIS

 

http://www.redlinetuning.com/product-p/21-27010-01.htm

 

Yep. Retrofit headlights. Put em off for way tooooo long. Shoulda been my 2nd mod behind the Weathertechs.

Heated seats are 2nd on the list. I dont know how I lived without them for so long.

Heated mirrors are the current mod Ive been wanting to do for a while now but keep putting off.

 

had no clue there was such a thing... amazing, these are now on my wish list!!

 

Shell

 

heated seats and AAL. my butt is warm and my axle is less wrapped. the way it should have come from the factory.

 

4crawler seat lift spacers. Seats are so much more comfortable now.

 

Silence the seat belt unbuckled chime (beeping)! The free mods are always my favorites

 

Yah seatbelt chime delete for driver and passenger.....wish I did it day one.

 

OK maybe this!
How do we do this without taking the dash out?

 

I did mine by using the Techstream software.

 

My solution.
https://www.tacomaworld.com/threads/deactivating-the-seatbelt-chime.439344/

 

I just did it following a thread here on tw. It's just key in out on off and holding trip odometer reset. The light still flashes but no damn beeping!

 

This worked on my 09
1) Turn the Car 'ON', but do not start the engine (Leave your foot off the brake). Cycle your tripreset knob until it reads ODO.Turn the ignition back off. Wait a couple of seconds.
2) Make sure seat belt is notfastened
3) Turn the ignition back on, do not start the car (Leave you foot off the break) As soon as you see everything light up, press andhold the trip reset knob and do a long 12 second count.
4) Keep your finger on the tripreset knob. Fasten your seat belt, as soon as you fasten your seatbelt, you should see the ODO display go from XXXX miles to "b-on". At that time take your finger off the trip reset knob and press it again. It should cycle to "b-off". You should be all set and turn the ignition off and unfasten yourseat belt.

 

Intermittent wipers.