Maxtrac Spindle Lift for 2nd Gen Prerunners

just run stock?

im back with stock trd bilsteins. I still havent adjusted the 5100s/ome886 down yet, but im curious to see if itll go nose high again. And then to also get around to sending the SAWs to someone to rebuild.

I rather have it near this height…with 35s. these are 265/75s.

 

Just noticed these are recommended to be used with 17" wheels.

I know this has been covered already, but will these work with 16s?

 

I'm running 16x8s, 0 offset.

 

4.5 backspacing.

 

@Alfuh

 

Im running em with an inch spacer…it looks like itll clear the brakes and spindle if I didnt have em on anyways.

 

Would it clear the spindle body tho?

 

Looks like it's doable with a spacer on 16s, bummer.

 

Three of my fat fingers fit between the lip of my rim and the spindle. It looks like itll clear and iirc ive seen it in this thread before that most 16s clear.

What I have now are the 2003ish tundra stocks. I have another set of these rims with 33x12.50 interco swampers and I had issues of the tire before hitting my stock control arm(but I cant remember if it was on this truck or the older lifted ifs toyota I drove). How the spindle is made, it pushes the tire away from the spindle and uca..right?

If I have time im gonna throw the fj stocks on with 285/70s.

 

Marie seems to recall that a 16" wheel will work if it has a 4.5 backspacing, which I have..

Anybody can confirm this?

I'm running Level 8 MK6 in 16x8, 4.5 BS, 0 offset.

 

^^^^this, this is the exact specs for my wheels and ive ran my 16s without spacers at one point with the spindles and I cleared perfectly, not much room, but they cleared

 

What did you paint those suckers with. Coal dust?? LOL

 

I never painted mine lol, I need to take em off at some point and clean em up and paint em lol

 

Wow, they really arent in too bad of shape for not being painted (other than what they come with)

Very suprised

 

Any bites?

 

LOL, 1 sec

 

No.

Local added his matching rear shocks to the pot of availability, so it's a full setup minus leafs/block for cheapo.

 

Like I said lol, those photos were taken 2+ years ago lol. I really do need to take mine off and clean them up lol