FS: Bilstein 5100's/OME 885/and other lift parts-NORCAL

I have a set of REvtek spacers (Sorry top plate spacers in pic have been sold) for the front and a set of Toytec 1" aluminum lift blocks with U-bolts (pics up soon). Prefer local sale but will ship USPS if buyer pays. This is an inexpensive way to lift and level your truck 2.5" and still have it aligned within specs.

REvtek spacers-$40
Lift Blocks w/U bolts-$55

 

pm sent =)

 

pm sent...where in norcal are you located?

 

San Jose

 

As of now first dibs on Struts/Springs/top plates goes to AznBoi since he is semi-local. Next in line is Cudason.

 

pmd

 

2"

 

you need the top plate spacer for 3"

 

thanks for the interest in struts and springs but they have been sold to AznBoi. Revtek spacers and rear blocks still for sale.

 

the 885's without the spacer and bilsteins at 0 give just over 2" somewhere between 2.25 and 2.5 depending on version and age. I had to add the spacer to get 3"

 

Just to clear this up. You are correct1 It all depends on which version you have. Since I bought these new back in November I made sure they were the newer ones, which are signified by a little white label on the spring itself. At the zero setting I achieved 2.5" and with the top plate just about 3.25".

Bump for REvtek spacers and rear Toytec 1" blocks.

 

Same here. After I installed the 5100's and 885's w/the top plate spacer I was just over 3"s but after a few months of settling, it went down closer to 3".

 

just received my package
bumping for a quick and easy transaction