SixtyDashOne's 2013 Regular Cab Build

Thanks brotha!!

 

Nothing new to report so far. Thinking about switching to 285's but not sure if they will fot with the current suspension

 

They will fit with a lot of

 

What suspension do you have now?

 

Bilstein 5100's @ 1.85 in the front and 1 inch blocks in the back. But i was also told that the 1.85 bilsteins was 1.85 on a doublecab with a 6cyl. Which weighs 175lbs more in the front. When inwas side by side with a DC with the same suspension and wheel size, mine was slightly higher. Hehe

 

Hey Sixty, can you give me some more specifics on the OEM 110v inverter you installed? Is the inverter itself OEM, or just an OEM outlet/cover? I'm thinking I may want this.
Thanks for any info!
-Bill

 

Hey Bill! Its actually an aftermarket Inverter. And i just used the oem outlet in the bed. Works great so far. Couldnt be happier

 

Ok, I wondered if that's what you had done with it. Nice setup! How many watt is your inverter?

 

yes sir.. I think I posted a pic of it mounted behind my passenger side seat. its a 1000w inverter with a 2000w max. and I just ran a line to the bed for ease of use.. and I wanted a factory look.. JUST the plug receptacle that I bought was only $30 from Toyota.

 

Looks real good, brother! I just got done cruising ebay, where some dealer is offering a new OEM shorter bed pocket with inverter outlet for $250. Mind you, that doesn't even include the price of the actual inverter, and the pic didn't show that it even included the shorter pocket cover lid, either! No thanks, I'm good with the $30 route!

Edit: ORDERED!! and thanks again for the inspiration!

 

yah I saw the same thing! I was like F-that! let me see if I can dig up that part code for you

 

85530-04010 - socket - $29.32 from Camelback Toyota

 

That's the animal, just ordered one!

 

im glad I could help in any way! we expect picture updates as well

 

You got it, and thanks again for the inspiration!

And HAPPY THANKSGIVING!!!

 

More inspiration from your 1st truck my friend!

Are these Toyota OEM rings? This idea has huge merit. When I got my truck, they threw in the nice aluminum bed divider. But I'm always playing leapfrog between the brackets for that, and the plastic OEM tie-downs on each side. This setup would pretty much eliminate the need for the 4 sliding tie-downs, or so it would seem.

 

They Are not Toyota rings, but you can get them in the link below
http://www.armysurpluswarehouse.com...links/rope-ring-with-clip-b21-5-for-5-00.html

nice and cheap! they jingle a little bit when u hit large bumps but they are very useful and ultra affordable! one of my favorite cheapie mods!. and they actually look great, look factory and are well built

oh, and thank u for the props!

 

Nice! And thank you for the link! At first glance I was doing the math, and coming up with like $65.00, but then I saw that it was $6.50 for FIVE!
Win!

 

Hahhaha. Winning x 5!!!!!

 

What did you do here? I didn't notice any mention of this...
"You got some 'splaining to do"