Installed my new VLED Switchbacks in my 2016!

Yes!

 

The kit comes with resistors to prevent hyper flashing!

 

Your welcome man!

 

The VLED link you posted are the ones you are using and this is plug and play right. Just wanted to verify before I order them up.

 

Nevermind I went back through your post and answered my questions. Thanks for posting this. I have Vled's in most of my motorbikes, good stuff.

 

Your welcome, anytime man!

 

Do the DRL get dimmer when your headlights are on? From the pics it seems as if they are the same brightness as when headlights are off. Just wondering if it's blinding to oncoming drivers at night.

 

There is a dimmer on the drl but I dont have it hooked up cause the drls are like 650 lumen and the dimmer only dims them 10%. So that's only 65 lumens which would hardly be noticeable.

 

Was there extra wiring to do. Or plug and play

 

Plug and play!

 

My taco was totaled. Moved the VLEDs over to the replacement ride

 

Love mine! I did the Amber/Amber switchback.

 

strongly considering this. kinda miss those amber running lights.

 

Strange question. Since the TRD models have the led strip on the sides, is the turn signal still a 7443 or just a 7440 and not able to run on 2 colors?

I ordered some switchbacks from a different company that ive had good luck with and im only getting them to come on amber with the turn signal. Although, i havent yet put in my resistors, if that matters.

 

Do you have it hooked up to the drl wire? If not, I'm assuming there's no power for the drl half of the bulb.

 

No, then how would it function as a turn signal?

 

it won't since you aren't using the triton switchbacks which are the topic of this thread.

 

Youre missing the point of my question. A switchback is a switchback regardless of brand. My question was, is the turn signal different on the SR to the TRD. If the TRD only has a 7440 socket rather then 7443(because the running light is in a different place to the sr) then you wouldnt be able to use this anyway on a TRD unless you wanted to tap the running light wire.

 

SR- has 3 wires @ turn signal socket:

--ground//DRL +12V//Turn signal +12V

Other models(sport,OR,limited)- have 2 wires

--Ground//Turn signal +12)

Switch backs will not function as DRL & turn unless you there is a wire tapped from the OEM LED strip to give a DRL signal.

I did it in my Off-road. I missed that distinct Amber DRL lights that my 2Nd Gen had. Kinda bummed Toyota only opt'd for White outside DRL LED strips instead of the inside turn bulbs.

 

BOTH on(and both dim with headlight circuit on);