Colorado Trading Post

Are those 16" or 17"

 

I might have to take you up on your offer. My exhaust is rusted pretty good. I'll PM you.

 

Featherlite 3110 Car Hauler Flatbed Aluminum Trailer 17'6" length x 8'6" wide

Selling my 2006 Featherlite 3110 Flatbed Aluminum Car Hauler trailer. This thing is in mint condition, and of course since it's all aluminum, has ZERO rust! I bought it new in 2007. It has been pulled less than 2,000 miles in its life. I just put four new tires on it in August because the old tires were dry cracking, not at all because they were worn down.


- 17-feet 6-inches in length by 8-feet 6-inches wide (normally they are only 17'x8')
- Removable fenders
- Two heavy duty aluminum ramps that store under the rear of the trailer
- Rides on two rubber torsion axles with electronic brakes
- Four stainless steel swivel D tie downs
- Coupler size is 2 5/16"

Zero accidents, and in mint condition, don't miss out on this deal! I recently installed a 4.5 cubic inch tongue storage box (can be seen on the 2nd picture) that's included with the trailer.

Clean Colorado title in hand. I'm in Southeast Fort Collins and can show the trailer where I store it locally.

Call or text if you need it. Cash sale only, I will not finance or take payments for it.

$5400.00

Steve
970-443-165one

 

It's a rampant rumor that was started months ago. I have yet to see an official post on it.

 

Their 17x7.5 ET15.

 

2nd dibs

 

You got it, I'll let you know if @Chilly doesn't take it.

 

Are you tired of your butt dragging all over the place? I've got a set of ICON Add A Leaf's (1.5'') for Sale. I bought an All Pro Expo Pack instead. $150 Located in Winter Park, but go to Denver regularly or could meet in Empire? I'm not sure where the shackles went, but they're a very cheap part, hopefully the price reflects this.

 

I just listed a set of ICON AAL's. I came to the same conclusion after called the dealership then just added the AAL. They worked great until I started carting around too much crap on overland trips....

 

Did you use them at all? How many miles were put on them?

 

I ran them for about 5K miles. I took them off my stock leafs and scrubbed all the plates and hit them with a fresh coat of rattle can high strength.

 

Bump, price now $25, which is what it was going to be on the home brewer forum, except he can't seem to find time to list it...

 

It's worth pointing out that (based on year of your truck) there was an earlier TSB or two about sagging springs which the AAL might address. I had that one done, and it was pretty simple. Took it in, described the 'problem', they ordered the springs, took it in when parts arrived, had it back in a couple of hours.

However the 'new' recall is because the leaves on both original and TSB springs have shown potential/tendency to actually break, and the AAL alone isn't going to address that. However as others have already mentioned, taking it in for the recall if you had AAL installed might lead to 'issues' (they won't put it back on, won't take it out of the old pack, etc.). I guess it might depend on what dealer you take it to.

 

Anyone know if one of the local dealers might be having a black Friday sale on toppers? Been wanting one ever since I got my 2016 and could get one if the price is right somewhere.

 

Haven't heard of specific Black Friday specials but, when I comparison shopped (Snugtop, ARE, and Leer) a couple of months ago, Suburban Toppers had the best deals, by hundreds of dollars.

 

Thanks; I got a quote from them a few months ago and it was very reasonable. I might give them a call tomorrow -- thanks.

 

I have a set of Icon coilovers that have been sitting in my garage for a while now for 2nd gen tacos (sold my 06 a while ago, unsure if these fit 3rd gens).
They are the normal travel and have 650 lb springs on them. They were on my truck for ~45k miles. When I took them off I had the oil/seals replaced by the local guy who was on this forum for 100 bucks labor (all icon parts, oil) The lower heim joints (spherical bearings) are worn and need to be replaced before use. I have the parts to do this and they will be included.
Otherwise they are in good shape. They have the IVD coating on the shock bodies too, which was an extra 100 bucks at original purchase.
At this point I just want to get them out of my garage---- Price is $450 firm.

I also have some replacement Icon springs, brand new (650 lb) for these coilovers. Will sell separately or with coilovers.
$75 separately, but will make a deal with coilovers.

I'm in Lakewood, if you prefer my email is dwag00@hotmail.com.

 

bUMP!