What Have You Done To Your 3rd Gen Today?

Looks black & green to me. I dig it.

 

How do you see out back window with that tire mounted there?

 

It's an olive/military green.

 

Do you have the part number for the back Matt. I found the front drivers and passengers on eBay, but it doesn't include the back single Matt that goes accross the whole back.

 

You know...you have to weigh out what is important to you. I can see out the edges. Not straight behind me, but if I really wanted to, I could just lower my universal mount.

 

$111 Toyota Genuine PT908-36164-20 Black All Weather Floor Liners

https://www.amazon.com/gp/product/B017YAIJYM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

And while you're at it you might as well get some of these to keep the passenger side front from moving.

http://www.ebay.com/itm/171348959983?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT

 

Hell ya.. Unfortunately I am too busy in the summer to get much done to the truck. I am tired of the sloppy/bouncy TRD OR suspension. Draggin the hitch receiver off road is getting old. Merry Xmas too me

 

KYJO your truck looks excellent ! Realy good good job . If you don t mind the factory bed d ecal has to go and get a black decal. It just looks out of place in silver you know.

 

Thank You!

 

Which one?

 

Are you talking about the TRD 4x4 Off Road Decal? If so, do you have a website for the black decal?

 

Looks fantastic good job

 

https://www.tacomaworld.com/threads/custom-made-vinyl-stickers-bedsides.281228/

 

Thank You!

 

Just threw these on...

 

Did this today.

 

Installed my 2nd gen NFab steps on my 3rd gen. Long story short, they do fit. The plastic cap on the front end is touching the body mount so I'll remove the cap, cut the tube down, and put the cap back on. The front mount is also different. The bolts are spread part about 5" OC on the 3rd gen and only about 1.5" OC on the 2nd gen. I put one bolt in up front rather than 2 and it's plenty sturdy. All other bolts lined up perfectly and they fit nicely. I'm not a fan of steps, I don't like or want them, don't have a choice with 2 kids and a petite wife so it is what it is. I guess that's part of driving a lifted truck lol.

 

Debadged the V6

 

Washed and waxed before winter hits. I used Chemical guys butter wet wax

 

congrats

congrats! Sik!