What Have You Done To Your 3rd Gen Today?

Yes. The spacer on front lifts the truck twice the size of the spacer. So a one inch spacer will give you two inches of lift. On the back, a one inch block just gives you one inch of lift. A two inch block would give you two inches of lift on the back.

 

Cool ! Thanks for the info

 

I would put 1" blocks on the back. Then you'll be level. And have more clearance in the back with your tires.

 

Thanks for the pictures. I have talked to Vin and the SCS wheels (Ray10s) are on my top three list. I just like true bead locks and they don't make any.

 

Nope rides like a dream

 

Seems some of us have the abs stuff on the right side where a 2nd battery could go and some of us don't. I do which sucks because id love a 2nd battery.

 

Thanks
I think that's what I'm going to do

 

It's going to go next to the battery, just above the stock fuse panel. The hole in the middle is for the clutch resevoir

Plate came from @Pelfreybilt thanks to their Black Friday/Thanksgiving Sale LINK

It's going to be an auxillary fuse panel for adding lights and other electrical things without having to mess with the trucks stock wiring too much. The only parts of the truck wiring i'll touch are the battery hot, the ground, and an add a fuse to trip the relay so the panel is only powered when the trucks on.

 

I had my alignment done after the 2" lift on the front, then put the 1" blocks on the back one week later. I had the alignment re-checked and it was still good. So if you add the 1" blocks to the back, your alignment in the front should still be good

 

SON OF A BITCH!

 

How'd ya manage to swing that? That's almost like the rocky mountain pin striping from the front of my truck to the back just below my passenger mirror!

 

I would die ! Lol

 

Agreed

 

Still looking for picture of those Ray10s in dark bronze on a inferno.

 

Ouch

 

Shiny!

Nice!
Rigid light bar in the grill too?

 

What manufacturer did you use for your rear bumper?

 

Mobtown. Sorry I thought I divided those manufacturers appropriately. I'm looking forward to it.

 

I don't know. Only thing I can think of is I've been to the Home Depot 5 times in the last 4 days and I had my tailgate down with some lumber in the bed. I'm guessing someone backed into my truck and just left. Words can't describe just how fucking pissed I am right now.

I just ran to Giant and I was putting a case of water in the bed when I noticed it.