1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

beertime's buildthreadcontinuum and DYF BS

Discussion in '2nd Gen. Builds (2005-2015)' started by beertimecontinuum, Mar 21, 2016.

  1. Dec 3, 2016 at 7:57 AM
    #321
    beertimecontinuum

    beertimecontinuum [OP] What's outside the simulation?

    Joined:
    Dec 29, 2013
    Member:
    #119461
    Messages:
    9,993
    Gender:
    Male
    First Name:
    Everett
    Ky,Earth,SolarSystem,MilkyWay,VirgoSupercluster
    Vehicle:
    10 Pyrite DCSB VEEEEEE 1.618
    FoxShox, Dirt King Heims, Chevy63s, 2UZ-FE V8 Flowmaster 40, Demello Front/DYF Rear w/Swigouts, BAMF sliders, DYFAF
    Thanks dude!!
    Decided to keep mine since the TPMS fit my wheels. The light comes on when I'm aired down of course, but also alerts me when one of tires is low for dd. handy when the beads are full of mud and clay from wheeling and get low occasionally lol
     
    Last edited: Dec 4, 2016
    11TRDTX likes this.
  2. Dec 3, 2016 at 8:35 AM
    #322
    allmotorrex

    allmotorrex Grove St. Fab

    Joined:
    Aug 29, 2010
    Member:
    #42441
    Messages:
    16,746
    Gender:
    Male
    First Name:
    Gideon
    Memphis 901
    Vehicle:
    08 SR5 4wd 2.7
    NWF crawlbox, 5.29s, rear Detriot, front Harrop, 37" SXIIs, 17x9" KMC Grenade Crawl beadlocks, Dirt King 3.5" LT kit with King shocks, Fox 12" smooth body RR, BAMF shock kit, AP 3" springs, ext. brake lines, custom 1 piece driveshaft with .135 wall tubeing, GSF front rock crawling bumper, GSF rear bumper, Relentless Fab ifs skid, BAMF k/o sliders, X2O 10K comp. winch, TP glass fenders, OKled 20"bar, EBS dimpled/slotted rotors, EBS green pads, custom K&N CAI, LCE headers, FM Super 44 w/h turn down, URD MAF, Spec clutch, LCE heavy flywheel, URD short shifter, TMPer M1 Abrams shift knob, Amsoil oil, Cobra 75wxst w/h 4' firestix, Grillcraft, FXR TRS, T1 eyelids, custom ADV Monster 60 lights, bed lights, speedo light mod, Glow Shift volt/oil pres gauges, Glow shift 2g column pod, Optima yellow tops dual battery setup w/h IBS system, Pioneer DEH-P7200HD head unit, Pioneer 600W 4ch & 350w 2ch amps for doors and sub, Wet Oakle covers
    I unsolder my light from my gauge cluster :D
     
  3. Dec 3, 2016 at 8:36 AM
    #323
    allmotorrex

    allmotorrex Grove St. Fab

    Joined:
    Aug 29, 2010
    Member:
    #42441
    Messages:
    16,746
    Gender:
    Male
    First Name:
    Gideon
    Memphis 901
    Vehicle:
    08 SR5 4wd 2.7
    NWF crawlbox, 5.29s, rear Detriot, front Harrop, 37" SXIIs, 17x9" KMC Grenade Crawl beadlocks, Dirt King 3.5" LT kit with King shocks, Fox 12" smooth body RR, BAMF shock kit, AP 3" springs, ext. brake lines, custom 1 piece driveshaft with .135 wall tubeing, GSF front rock crawling bumper, GSF rear bumper, Relentless Fab ifs skid, BAMF k/o sliders, X2O 10K comp. winch, TP glass fenders, OKled 20"bar, EBS dimpled/slotted rotors, EBS green pads, custom K&N CAI, LCE headers, FM Super 44 w/h turn down, URD MAF, Spec clutch, LCE heavy flywheel, URD short shifter, TMPer M1 Abrams shift knob, Amsoil oil, Cobra 75wxst w/h 4' firestix, Grillcraft, FXR TRS, T1 eyelids, custom ADV Monster 60 lights, bed lights, speedo light mod, Glow Shift volt/oil pres gauges, Glow shift 2g column pod, Optima yellow tops dual battery setup w/h IBS system, Pioneer DEH-P7200HD head unit, Pioneer 600W 4ch & 350w 2ch amps for doors and sub, Wet Oakle covers
    Hahahahahahaha I laughed at this. Give him another air high five from me.
     
  4. Dec 3, 2016 at 8:48 AM
    #324
    beertimecontinuum

    beertimecontinuum [OP] What's outside the simulation?

    Joined:
    Dec 29, 2013
    Member:
    #119461
    Messages:
    9,993
    Gender:
    Male
    First Name:
    Everett
    Ky,Earth,SolarSystem,MilkyWay,VirgoSupercluster
    Vehicle:
    10 Pyrite DCSB VEEEEEE 1.618
    FoxShox, Dirt King Heims, Chevy63s, 2UZ-FE V8 Flowmaster 40, Demello Front/DYF Rear w/Swigouts, BAMF sliders, DYFAF
    Did you pee your pants upon seeing my new tires too?
     
    11TRDTX likes this.
  5. Dec 3, 2016 at 9:53 AM
    #325
    allmotorrex

    allmotorrex Grove St. Fab

    Joined:
    Aug 29, 2010
    Member:
    #42441
    Messages:
    16,746
    Gender:
    Male
    First Name:
    Gideon
    Memphis 901
    Vehicle:
    08 SR5 4wd 2.7
    NWF crawlbox, 5.29s, rear Detriot, front Harrop, 37" SXIIs, 17x9" KMC Grenade Crawl beadlocks, Dirt King 3.5" LT kit with King shocks, Fox 12" smooth body RR, BAMF shock kit, AP 3" springs, ext. brake lines, custom 1 piece driveshaft with .135 wall tubeing, GSF front rock crawling bumper, GSF rear bumper, Relentless Fab ifs skid, BAMF k/o sliders, X2O 10K comp. winch, TP glass fenders, OKled 20"bar, EBS dimpled/slotted rotors, EBS green pads, custom K&N CAI, LCE headers, FM Super 44 w/h turn down, URD MAF, Spec clutch, LCE heavy flywheel, URD short shifter, TMPer M1 Abrams shift knob, Amsoil oil, Cobra 75wxst w/h 4' firestix, Grillcraft, FXR TRS, T1 eyelids, custom ADV Monster 60 lights, bed lights, speedo light mod, Glow Shift volt/oil pres gauges, Glow shift 2g column pod, Optima yellow tops dual battery setup w/h IBS system, Pioneer DEH-P7200HD head unit, Pioneer 600W 4ch & 350w 2ch amps for doors and sub, Wet Oakle covers
    Nope. Im a grown up. I don't pee my pants. Only poop them :D
     
    11TRDTX likes this.
  6. Dec 3, 2016 at 10:55 AM
    #326
    beertimecontinuum

    beertimecontinuum [OP] What's outside the simulation?

    Joined:
    Dec 29, 2013
    Member:
    #119461
    Messages:
    9,993
    Gender:
    Male
    First Name:
    Everett
    Ky,Earth,SolarSystem,MilkyWay,VirgoSupercluster
    Vehicle:
    10 Pyrite DCSB VEEEEEE 1.618
    FoxShox, Dirt King Heims, Chevy63s, 2UZ-FE V8 Flowmaster 40, Demello Front/DYF Rear w/Swigouts, BAMF sliders, DYFAF
  7. Dec 3, 2016 at 11:01 AM
    #327
    11TRDTX

    11TRDTX bruh

    Joined:
    Mar 15, 2012
    Member:
    #74980
    Messages:
    7,826
    Gender:
    Male
    First Name:
    Mike
    Memphis, TN
    Vehicle:
    2011 TRD TX 4x4 MGM DCSB
    Lift, 285's, mud, and scratches
    I run .6* camber, 3.4* caster, 0.00* toe.
     
  8. Dec 3, 2016 at 11:56 AM
    #328
    Dave41079

    Dave41079 Words go here.

    Joined:
    May 18, 2015
    Member:
    #155554
    Messages:
    4,226
    Gender:
    Male
    First Name:
    Dave...
    Nashville, TN
    Vehicle:
    The shittiest of boxes
    Things, stuff, and whatnot.
    If peeing your pants is cool, consider me Miles Davis.

    Not tagged, but that sounds like a lot of positive camber. I would go for as much caster as you can get, while keeping toe and camber close to zero.
     
  9. Dec 3, 2016 at 1:14 PM
    #329
    beertimecontinuum

    beertimecontinuum [OP] What's outside the simulation?

    Joined:
    Dec 29, 2013
    Member:
    #119461
    Messages:
    9,993
    Gender:
    Male
    First Name:
    Everett
    Ky,Earth,SolarSystem,MilkyWay,VirgoSupercluster
    Vehicle:
    10 Pyrite DCSB VEEEEEE 1.618
    FoxShox, Dirt King Heims, Chevy63s, 2UZ-FE V8 Flowmaster 40, Demello Front/DYF Rear w/Swigouts, BAMF sliders, DYFAF
    Think I had my caster and camber mixed up
     
  10. Dec 3, 2016 at 1:57 PM
    #330
    beertimecontinuum

    beertimecontinuum [OP] What's outside the simulation?

    Joined:
    Dec 29, 2013
    Member:
    #119461
    Messages:
    9,993
    Gender:
    Male
    First Name:
    Everett
    Ky,Earth,SolarSystem,MilkyWay,VirgoSupercluster
    Vehicle:
    10 Pyrite DCSB VEEEEEE 1.618
    FoxShox, Dirt King Heims, Chevy63s, 2UZ-FE V8 Flowmaster 40, Demello Front/DYF Rear w/Swigouts, BAMF sliders, DYFAF
    SO, I'm pulling my coilovers to remove my DYF 1/2" top plate spacers and wasted a bunch of time with a spinning stud on top of my Toytec coilovers. Had to cut it off then drill tap a set screw in to it since I can't split the coil right now FML. Back to alignment.
     
  11. Dec 3, 2016 at 1:59 PM
    #331
    beertimecontinuum

    beertimecontinuum [OP] What's outside the simulation?

    Joined:
    Dec 29, 2013
    Member:
    #119461
    Messages:
    9,993
    Gender:
    Male
    First Name:
    Everett
    Ky,Earth,SolarSystem,MilkyWay,VirgoSupercluster
    Vehicle:
    10 Pyrite DCSB VEEEEEE 1.618
    FoxShox, Dirt King Heims, Chevy63s, 2UZ-FE V8 Flowmaster 40, Demello Front/DYF Rear w/Swigouts, BAMF sliders, DYFAF
  12. Dec 3, 2016 at 2:01 PM
    #332
    beertimecontinuum

    beertimecontinuum [OP] What's outside the simulation?

    Joined:
    Dec 29, 2013
    Member:
    #119461
    Messages:
    9,993
    Gender:
    Male
    First Name:
    Everett
    Ky,Earth,SolarSystem,MilkyWay,VirgoSupercluster
    Vehicle:
    10 Pyrite DCSB VEEEEEE 1.618
    FoxShox, Dirt King Heims, Chevy63s, 2UZ-FE V8 Flowmaster 40, Demello Front/DYF Rear w/Swigouts, BAMF sliders, DYFAF
    Also, I may be onto something here, DGF or Drunken Garage Fab is definitely the way to go
     
  13. Dec 3, 2016 at 2:58 PM
    #333
    423 TACO

    423 TACO Well-Known Member

    Joined:
    Jun 15, 2012
    Member:
    #80752
    Messages:
    4,091
    Gender:
    Male
    First Name:
    Daniel
    Knox-ish, TN
    Vehicle:
    13 MGM Sport 6sp AC
    Ditch the Coilovers, sas now. Cut it off tonight figure rest out later
     
  14. Dec 3, 2016 at 4:27 PM
    #334
    allmotorrex

    allmotorrex Grove St. Fab

    Joined:
    Aug 29, 2010
    Member:
    #42441
    Messages:
    16,746
    Gender:
    Male
    First Name:
    Gideon
    Memphis 901
    Vehicle:
    08 SR5 4wd 2.7
    NWF crawlbox, 5.29s, rear Detriot, front Harrop, 37" SXIIs, 17x9" KMC Grenade Crawl beadlocks, Dirt King 3.5" LT kit with King shocks, Fox 12" smooth body RR, BAMF shock kit, AP 3" springs, ext. brake lines, custom 1 piece driveshaft with .135 wall tubeing, GSF front rock crawling bumper, GSF rear bumper, Relentless Fab ifs skid, BAMF k/o sliders, X2O 10K comp. winch, TP glass fenders, OKled 20"bar, EBS dimpled/slotted rotors, EBS green pads, custom K&N CAI, LCE headers, FM Super 44 w/h turn down, URD MAF, Spec clutch, LCE heavy flywheel, URD short shifter, TMPer M1 Abrams shift knob, Amsoil oil, Cobra 75wxst w/h 4' firestix, Grillcraft, FXR TRS, T1 eyelids, custom ADV Monster 60 lights, bed lights, speedo light mod, Glow Shift volt/oil pres gauges, Glow shift 2g column pod, Optima yellow tops dual battery setup w/h IBS system, Pioneer DEH-P7200HD head unit, Pioneer 600W 4ch & 350w 2ch amps for doors and sub, Wet Oakle covers
    Where's Mike at when you need to show him why I said "Walk away from the Toytec website"!?
     
  15. Dec 3, 2016 at 4:30 PM
    #335
    allmotorrex

    allmotorrex Grove St. Fab

    Joined:
    Aug 29, 2010
    Member:
    #42441
    Messages:
    16,746
    Gender:
    Male
    First Name:
    Gideon
    Memphis 901
    Vehicle:
    08 SR5 4wd 2.7
    NWF crawlbox, 5.29s, rear Detriot, front Harrop, 37" SXIIs, 17x9" KMC Grenade Crawl beadlocks, Dirt King 3.5" LT kit with King shocks, Fox 12" smooth body RR, BAMF shock kit, AP 3" springs, ext. brake lines, custom 1 piece driveshaft with .135 wall tubeing, GSF front rock crawling bumper, GSF rear bumper, Relentless Fab ifs skid, BAMF k/o sliders, X2O 10K comp. winch, TP glass fenders, OKled 20"bar, EBS dimpled/slotted rotors, EBS green pads, custom K&N CAI, LCE headers, FM Super 44 w/h turn down, URD MAF, Spec clutch, LCE heavy flywheel, URD short shifter, TMPer M1 Abrams shift knob, Amsoil oil, Cobra 75wxst w/h 4' firestix, Grillcraft, FXR TRS, T1 eyelids, custom ADV Monster 60 lights, bed lights, speedo light mod, Glow Shift volt/oil pres gauges, Glow shift 2g column pod, Optima yellow tops dual battery setup w/h IBS system, Pioneer DEH-P7200HD head unit, Pioneer 600W 4ch & 350w 2ch amps for doors and sub, Wet Oakle covers
    That toe is fine. It will help with straight line stability, no way you need to run camber like that. Depending on your lift (I know yours is high), I'd run zero to +.5 and at least 2° caster. If you're talking to an alignment guy tell him caster as high as it will go while achieving the other two numbers
     
  16. Dec 3, 2016 at 4:58 PM
    #336
    beertimecontinuum

    beertimecontinuum [OP] What's outside the simulation?

    Joined:
    Dec 29, 2013
    Member:
    #119461
    Messages:
    9,993
    Gender:
    Male
    First Name:
    Everett
    Ky,Earth,SolarSystem,MilkyWay,VirgoSupercluster
    Vehicle:
    10 Pyrite DCSB VEEEEEE 1.618
    FoxShox, Dirt King Heims, Chevy63s, 2UZ-FE V8 Flowmaster 40, Demello Front/DYF Rear w/Swigouts, BAMF sliders, DYFAF
    @mpkramer71
     
    KRAMERICA likes this.
  17. Dec 3, 2016 at 5:01 PM
    #337
    beertimecontinuum

    beertimecontinuum [OP] What's outside the simulation?

    Joined:
    Dec 29, 2013
    Member:
    #119461
    Messages:
    9,993
    Gender:
    Male
    First Name:
    Everett
    Ky,Earth,SolarSystem,MilkyWay,VirgoSupercluster
    Vehicle:
    10 Pyrite DCSB VEEEEEE 1.618
    FoxShox, Dirt King Heims, Chevy63s, 2UZ-FE V8 Flowmaster 40, Demello Front/DYF Rear w/Swigouts, BAMF sliders, DYFAF
    Thanks, and yes, I mixed my camber/caster terminology lol. I'm having some trouble, long story short I'll be 0° toe, 0° camber, fuck ton O' caster :D
     
    11TRDTX likes this.
  18. Dec 3, 2016 at 5:02 PM
    #338
    beertimecontinuum

    beertimecontinuum [OP] What's outside the simulation?

    Joined:
    Dec 29, 2013
    Member:
    #119461
    Messages:
    9,993
    Gender:
    Male
    First Name:
    Everett
    Ky,Earth,SolarSystem,MilkyWay,VirgoSupercluster
    Vehicle:
    10 Pyrite DCSB VEEEEEE 1.618
    FoxShox, Dirt King Heims, Chevy63s, 2UZ-FE V8 Flowmaster 40, Demello Front/DYF Rear w/Swigouts, BAMF sliders, DYFAF
    And fresh out O' beeers
     
  19. Dec 3, 2016 at 11:20 PM
    #339
    KRAMERICA

    KRAMERICA Old Man Mike

    Joined:
    Mar 22, 2015
    Member:
    #151504
    Messages:
    3,861
    Gender:
    Male
    First Name:
    Mike
    Middle Tenn
    Vehicle:
    '18 F250 Super Duty
    A couple of rear window decals...
    Hey, I listened I didn't buy anything from ToyTec...
     
  20. Dec 4, 2016 at 3:59 AM
    #340
    Bluegrass Taco

    Bluegrass Taco Politically incorrect low tech redneck

    Joined:
    Jul 27, 2015
    Member:
    #160391
    Messages:
    23,099
    Gender:
    Male
    First Name:
    Bill
    Mt Washington Ky
    Vehicle:
    2011 DCSB, TRD OR, 5100's, 885's 285/75r16 Cooper STT PROs.

    Call 911.....IMEDIATELY.

    And +++++ on the garage thingy!

    Playing with new toy yesterday. Bought me a DeWalt cordless impact. Decided to do something nice and simple, like rotating tires. First, seals blew out on floor jack. Then I got in a fucking hurry and crossthreaded a lug nut. Broke a stud getting that back off. (BTW, DeWalt impact has enough gonads to snap a stud FTMFW!) Went to 2 different parts houses before I found a new lug nut. Stud was easy to find....until I remembered studs were NOT OEM (Bora wheel spacers) Spent almost an hour sorting through misc. studs at Bumper to Bumper. Found right one just minutes before they closed. So....10 minute tire rotation turns into 3 hour screaming event. YMMV.

    Was impressed with impact though!
     

Products Discussed in

To Top