What Have You Done To Your 3rd Gen Today?

TRD exhaust I believe holds the same tone as the OEM exhaust just a little louder which may be a good thing. Which lift are you looking at?

 

Haven't don3 much research.but I was thinking maybe ruff country . 4 "lift cost $999

 

The fit was excellent. The only thing I would add is take off the two plastic dirt covers on the sides of the radiator before install then cut a small section of it out and you can reinstall it.C4 fab makes excellent products I got the sliders also and they fit perfect. coming from a Rubicon and buying many after market parts I can say just how well built c4 products are.

 

4" lift will require more parts than included in any lift for $1000 I can tell you that with absolute certainty. Its not complete and you will have issues with it. Stay below 3" and you'll be fine and its a lot easier. AAL or new rear springs or a block, whatever you want or can afford. Extended length rear shocks, front shocks and new springs, front upper control arms, front sway bar brackets. You're looking in the $1500 range to do that right. If you want to go balls to the wall, you can spend north of $3500-$4000 on a 3" lift but most of us have no use for that.

 

Aw man you know how to use the internet. Good job! Grab a tape measure and head to your local tire shop and you'll find the truth. Tire manufacturers can has a 7% discrepancy in size based on the actual measurements like what you posted. Like I said I had a k02 285/75r16 and a 295/75r16 side by side and it was a lot wider but maybe a 1/4" taller. Both were under 32 1/4" unmounted. I attatched the pic again in case you missed it.

 

Yeah I bet. sky's the limit with aftermarket shit . Def not need for me to go that far for what I use it for. but I'd be okay putting at most 2 grand ino it

 

Lol ^^
One of my best friends has the 295 and they r exactly 33 1/4" and I know how to use a tape measure. I'm a general contractor . I don't know what else to tell you

 

Hit 5000 miles today. Took me 9 months but I'm glad I'm able to keep the miles off it.

 

Shit I've had myne two months and I'm at 3400

 

It's nice only having a 5 mile round trip to work.

 

You and your "friend" may just be used to exaggerating your measurements but i used several tape measures on my leveled concrete floor in my shop both of which measured near 32" unmounted. Do some research bfgs run small.

 

What kind of lift do you have on your Tacoma? The height looks just right

 

me and my "friend" just measured the tires again 2 minutes ago and his 295
Are 33 1/4"
I'm not gonna argue with u
So this is my last comment

 

Currently just cheap spacers. Front is lifted with a bolt on top spacer, stock springs and shocks. Rear is a 2.5" block and Bilstein extended length 5100 shocks. Front will soon be 3rd gen Bilstein 5100 shocks set to 0 and OME 888 coils. Also going with JBA upper control arms.

 

What day? And do y'all discuss meets in the Az thread ? Thanks.

 

It'll be Sunday I think. sometimes we do discuss meets in the AZ bs thread but there's also an az meet specific thread. There's a big one in the works for after the 1st of the year. Every so often, we try to get a big one with as many members as possible

 

Ok thanks ! Can't wait to meet up with you guys some time .

 

Likewise!

 

What rim width are they mounted on ? Maybe that is the difference ?