1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Changing front/rear Diff, Transfer Case and Manual Trans Gear Oil. How many Quarts do I need? Evergreen Timing Belt Kit Water Pump: low cost === cheap parts? T100 oil pan conversion for SAS..please help! Tire Recommendations Upstream vs downstream O2 sensors 3.4L losses power under heavy load

Helper leaf = lift??

Discussion in '1st Gen. Tacomas (1995-2004)' started by gnew, Dec 5, 2016.

  1. Dec 5, 2016 at 11:46 AM
    #1
    gnew

    #1
    gnew [OP] New Member

    Joined:
    Dec 5, 2016
    Member:
    #204083
    Messages:
    2
    Gender:
    Male
    First Name:
    greg
    Vehicle:
    2004 Tacoma ext cab
    I bought a used 04 that needs new shocks. The truck came with helper leafs installed and so sits higher (i know...). Should I get a set of rear shocks with stock specs or for lifted (eg Bilstein 5100 for 1" lift). I initially assumed yes but thought I check and couldn't find an answer searching the forums. Thanks
     
    gnew, Dec 5, 2016
    #1
  2. Dec 5, 2016 at 11:52 AM
    #2
    98tacoma27

    #2
    98tacoma27 is going full "SANDWICH" Moderator

    Joined:
    Dec 18, 2008
    Member:
    #11714
    Messages:
    67,858
    Gender:
    Male
    First Name:
    Ben
    Not Beech Creek
    Vehicle:
    05 Tundra SR5 (+295k AND COUNTING), 2006 F350 King Ranch 6.0L
    Some stuff. Not a lot, just some.
    Welcome to TW.

    You could go either way. If you keep the rear wheels on the ground (meaning you don't wheel), then the stock shock will be fine. If you want a better quality shock, then go for the Billy or OME (Old Man Emu).
     
    98tacoma27, Dec 5, 2016
    #2
  3. Dec 5, 2016 at 11:59 AM
    #3
    neverstuck

    #3
    neverstuck Well-Known Member

    Joined:
    Sep 7, 2009
    Member:
    #22406
    Messages:
    2,605
    Gender:
    Male
    First Name:
    Guido
    Lebanon
    Vehicle:
    13 DCLB sport
    slide-in camper, OME Nitros w 884's and Dakars, Michelin A/T2, Pro EFX heated towing mirrors, Timbren HD bumpstops, KB VooDoo bed rails and tailgate cap, ImMrYo rvm bracket, G-Tek Fab door sill protectors, Ultragauge, window visors, hood deflector, Wet Okole seatcovers, in-vehicle safe.
    Even with the rear tires hanging, I don't imagine helper springs would lengthen downward travel. All they do it resist compression of the original spring pack. They won't make it hyper-extend.

    OP I'd say get replacements for stock height. Bilstein 5100's are still a good bet.
     
    neverstuck, Dec 5, 2016
    #3
  4. Dec 5, 2016 at 1:20 PM
    #4
    gnew

    #4
    gnew [OP] New Member

    Joined:
    Dec 5, 2016
    Member:
    #204083
    Messages:
    2
    Gender:
    Male
    First Name:
    greg
    Vehicle:
    2004 Tacoma ext cab
    OK thanks neverstuck, that makes sense.
    The Bilstein site says the 5100s are for 1-1.5" lifted vehicles
    $479 B8 5100 Series Set of Front & Rear Shocks fits 2016-2023 Tacoma with 0-1" Rear Lift | Provides 0-1" Front Lift | Includes TrendsAuto Decal | 24-263108 24-186728
    B8 5100 - Shock Absorber

    Part Number:
    $110 33-247724 5100 Series Single Rear Left Shock Absorber fits 1996 2004 Tacoma - Fits Vehicles with 1-1.5" Rear Lift - Minimum 1" Lift Block Required for Installation
    33-247724


    Series: B8 5100
    Drive Type: 4WD
    Position: Rear Left
    Descriptor: A minimum 1" lift block is required for this application
    Descriptor: For Rear Lifted Height: 1-1.5"
    Quantity Per Vehicle: 1

    Collapsed Length (IN): 13.62
    Extended Length (IN): 21.26
    Collapsed Length (MM): 346
    Extended Length (MM): 540

    Finish: Zinc Plated
    Reservoir: No
    Body Design: 46mm ID Smooth Body (Non-Coilover)

    Bilstein B8 5100 shock absorbers are designed as a direct fit solution for lifted trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B8 5100 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B8 5100 shock absorbers are tuned for each specific application to assure optimal performance is achieved. B8 5100 shock absorbers offer a significant improvement in ride quality, handling, and comfort.
     
    gnew, Dec 5, 2016
    #4
To Top